2020 BMW 3 Series engine problems

“I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs during cold-start operation in low ambient temperatures. When the component fails, oil pressure regulation becomes erratic or is lost entirely. In many cases, drivers receive little or no actionable warning prior to engine damage or vehicle disablement. Reported precursor symptoms include inability to electronically measure engine oil level, abnormal oil pressure behavior, or sudden drivetrain malfunction warnings. Failures may rapidly progress to engine shutdown or severe mechanical damage caused by oil starvation. Loss of lubrication can cause the vehicle to become disabled without warning while driving or shortly after startup. This creates a safety hazard, particularly…”

“Plastic components in the oil pump went out. BMW has made new oil pumps with metal components that are less fragile and do not fail as often. Outside of warranty these repairs can be very costly. I have had to pay out of pocket for these repairs myself. I do not understand why this is not a recall.”

“I'm reporting a safety issue with BMW vehicles equipped with the B58TU engine, primarily 2019-2021 models. These vehicles have an oil pump with an internal plastic component that regulates oil pressure, and this part is fracturing in the field, causing sudden loss of oil pressure. The failure typically occurs during cold starts in low temperatures. When it fails, oil pressure becomes erratic or is lost entirely, often with little to no warning before engine damage or vehicle disablement. Warning signs, when present, include inability to measure oil level electronically, abnormal oil pressure, or sudden drivetrain malfunction warnings. These can rapidly progress to engine shutdown or severe damage from oil starvation. This creates a dangerous situation because the vehicle can become disabled without warning while driving or after startup. This is especially hazardous when cars become immobilized in traffic or during winter conditions when failures occur most frequently, leaving occupants exposed to freezing temperatures while awaiting assistance. Pump replacement requires extensive disassembly and commonly costs $6,000-$8,000, assuming no engine damage. A…”

“I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs during cold-start operation in low ambient temperatures. When the component fails, oil pressure regulation becomes erratic or is lost entirely. In many cases, drivers receive little or no actionable warning prior to engine damage or vehicle disablement. Reported precursor symptoms include inability to electronically measure engine oil level, abnormal oil pressure behavior, or sudden drivetrain malfunction warnings. Failures may rapidly progress to engine shutdown or severe mechanical damage caused by oil starvation. Loss of lubrication can cause the vehicle to become disabled without warning while driving or shortly after startup. This creates a safety hazard, particularly…”

“Oil pump for the 2020 model is made with plastic internals. The passage that controls the flow of oil into your engine is made of plastic. The car didn’t even have 40,000 miles and the plastic broke causing the passage to be in a very close to shut position not allowing enough oil to enter the engine in higher rpm. The mechanic told me this is the biggest thing he is starting to see and he works for BMW Service center of Mamaroneck. He’s seen over 150+ B58TU (engine model) of the year 2020 with broken plastic in the oil pump. For the 2021 model year and up to 2026 they have updated the oil pump to metal internals and metal passageways solving the issue but are not helping us 2020 owners and aren’t taking any responsibility blaming it on owners. The repair cost over 3,000 dollars. I understand if it’s something they can’t figure out but they saw it was their own negligence on using better parts and they switch from plastic to metal oil pumps after they saw an increase of over 2,000+ 2020 bmws with the b58tu in it have this issue. There were no warnings, no lights on the dash, no check engine and no codes on the car or when read with a diagnostic scanner. I even…”

“The left hydraulic engine motor mount (P/N 22117581621) completely collapsed and failed at 6 years and only 24,811 miles. The right mount was also replaced at the same time (P/N 22117581622). The failure allows unsafe, excessive engine movement and shifting under rotational torque loads. This shifting creates an immediate safety hazard, risking the sudden compromise of surrounding mechanical systems, cooling lines, and electrical harnesses while the vehicle is in motion. BMW North America acknowledged the premature nature of the failure by approving a goodwill repair for the labor costs but forced me to pay out-of-pocket for the defective parts. The engine mount issue was detected when the vehicle went in for normal services and the known recall for the engine starter which had the potential to cause bodily harm as well as property harm due to fire risk, even when the engine was off.”