2019 Chevrolet Blazer steering problems

“Steering assist reduced message appeared Check engine light appeared, po128 code, thermostat and sensor defect. Common problem with these vehicles, GM has only recalled 2021 model even though the same engine and thermostat are on all V-6 models. Contacted GM, no assistance available on my year Blazer.”

“Electronically controlled thermostat and sensor fail or get stuck at a much lower coolant temperature causing the dash to display the “steering assist is reduced drive with care.” It isn’t just a message, the steering is much harder to use potentially causing an accident. The ac completely doesn’t work causing potential for sensitive, elderly, or young children and pets to overheat inside, it’s significant risk of injury or death from the hot summer temperatures. The engine coolant temperature gauge is all the way down on C position which isn’t registering how hot/cold the engine gets potentially causing damage to the vehicle and a total loss of the vehicle entirely due to damage from the engine overheating. After doing research online, this problem is affecting all years of the 2019+ blazers with the 3.6L V6 engine AND other known problems with other models and years of their other lineup of cars, it’s very widespread across their platforms. So what are people supposed to do when it isn’t? Pay an $3800+ repair bill to GM when they KNOW it’s more widespread than just this year/make? This is a scam. I’m reporting this complaint to raise awareness and hopefully…”

“Electronically controlled thermostat and sensor fail or get stuck at a much lower coolant temperature causing the dash to display the “steering assist is reduced drive with care.” It isn’t just a message, the steering is much harder to use potentially causing an accident. The ac completely doesn’t work causing potential for sensitive, elderly, or young children and pets to overheat inside, it’s significant risk of injury or death from the hot summer temperatures. The engine coolant temperature gauge is all the way down on C position which isn’t registering how hot/cold the engine gets potentially causing damage to the vehicle and a total loss of the vehicle entirely due to damage from the engine overheating. GM sent out letters to 2021 blazer owners which included a special coverage number N252508350 applying to people with this year having this problem and they have until 2036 or 150,009 mi to get the repairs made free of charge, they just bring the document with the special repair codes to the dealer and they fix it free of charge. After doing research online, this problem is affecting all years of the 2019+ blazers with the 3.6L V6 engine AND other known…”

“Shift to Park issue: Known issue where the car fails to recognize it is in Park, preventing it from shutting off. Electronics: Potential blanked-out display screens, USB port issues, and malfunctioning cameras. Steering Assist: Restricted, temperature gauge goes to cold and radiator fan blows hard. I have to unplug negative cable to battery and reconnect and everything goes back to normal.”

“The shift-to-park sensor in my 2019 Chevy Blazer RS is malfunctioning. After shifting into park, the vehicle does not detect that it is in park and displays a “Shift to Park” message. The issue is/has been ongoing and now it is almost impossible to bypass with wiggling the shifter. Safety Risk: The vehicle cannot be fully shut off or locked, increasing the risk of battery drain or unintended movement. This poses a safety risk if the vehicle is left in public or on an incline. Inspection History: The vehicle was taken in to the dealership in November/December 2025 due to MULTIPLE Warning Lights: “Shift to Park”, "Steering Assist", "Stabilink" and the usb-C charging port under the radio screen will stop working all together when this happens as well. This started around September 2025 and has occurred regularly since.”

“Was getting a steering assist reduced error code. Auto stop quit functioning and air conditioning stopped cooling. Engine sounded like a jet. P 0128 thermostat error code came up and had to be replaced. I see lots of similar complaints. Cost me $700.”