2006 Ford Escape Hybrid suspension problems

“The rear shock tower has rusted out and broken away from the frame which was conformed at a local body shop. The passenger side went first then the driver side went about a year later. There was no warning that this was happening until it broke while driving which made us lose control of the car. When we took it to a repair shop and said it was 2006 escape they responded what side did the shock tower break on this was before we told them it was a shock tower they said it's always that part on a escape I personally know 2 other people who have had the same problem all different years of escapes.”

“Both rear shocks, mounts, wheel wells, entire length of body door panels passenger seats are just absolutely rusted beyond repair. I've gone to a couple different shops and each one said that there is nothing they can do to fix the issue. Now the vehicle when ridden in just bounces horribly wearing out bearing springs and tires are being worn out. There is only 110759 miles on it and bought this for my wife/ kids cause I've had 3 other escapes in the past so since I work on the road this is prefect sized for then not to big or too small. I've had so many issues this last year with repairs parts and now worried about safety issues.”

“This 2006 Ford Escape Hybrid, and all first and second generation (2001-2012) Escape models, were designed and built with a significant, known defect in the mating area and materials used for the rear floor pan, rear sub-assembly/rails, and rear inner fender liners/upper shock absorber mounts, all made of pressed steel. The design of the components renders them subject to trapping road debris/salt/contaminants, and the inferior steel used oxidizes quickly, resulting in perforated areas of substantial rust. In our 2006 model, the right rear inner fender liner was completely replaced, and the rear subassembly/rails were welded, in 2013 with new Ford parts. By May, 2018, it had to be repaired and welded again. As of May, 2013, five years almost to the day, it has again rusted and separated. As this hybrid Escape carries a 600 pound battery between the rails in the rear of the vehicle, this is a substantial, dangerous defect affecting potentially millions of cars manufactured over a decade. The current status of the oxidation, corrosion, rot and decay affecting our Ford Escape has rendered it incapable of being repaired per the auto mechanic shop we visited first,…”

“Well to put it lightly my rear axial the whole rear end is a mess this did not happen from normal were there is not that many miles I am very confident that if I was mot train on how to control a car if it were to go out of control at a high speed this would be a whole different story just thank how many are still on the road this year 2006 escape is a ticking time”

“About a week after i bought this car and i bought it used but the abs light came on i took it to have it check out and was told the complete suspendtion system front and back was shot and that it all had to be fix i don't have the money for that i am a disabled veteran and i am scraping by as it is”

“THE REAR SHOCK MOUNT RUSTS OUT NOT LONG AFTER MANUFACTURE AND WE THE CONSUMER ARE LEFT WITH THE PILE OF POOP. FORD IS HIGHLY AWARE OF THIS PROBLEM, AND AS I TRANSPORT MY CHILDREN DAILY I WONDER IF THIS WILL BE THE DAY WE DIE. UPON THE SHOCK MOUNT RUSTING OUT, HOPE YOURE RELIGIOUS AND GOD IS YOUR CO PILOT BECAUSE AS THAT POINT THE SPRING IS WHAT YOU'RE LEFT WITH! ITS SO HORSE [XXX] FORD LEAVES THIS TO THE LITTLE GUY (THE CONSUMERS) TO RECTIFY THEIR PROBLEM DUE TO THEIR INFERIOR MANUFACTURING. I WAS GOING OVER THE I280 BRIDGE IN OREGON OHIO WHEN IT DECIDED IT WAS TIME TO FAIL.”