2016 Ford Fusion Hybrid power train problems

“purchased a used vehicle. At the time of purchase, there were no visible issues with the car. However, approximately 20 days later, a significant jerking and knocking problem related to the transmission appeared. Due to this issue, I stopped using the vehicle for a while. After consulting with a mechanic, I was informed that the transmission needs to be replaced. As of now, the car is struggling significantly to move. When I turn the ignition, the engine starts, but the vehicle does not move. If I turn the ignition off and restart it, it may move slightly after shaking the vehicle, but then it quickly stops and displays an error again. In this condition, the vehicle is not drivable. Unfortunately, the person I bought the car from refused to accept any responsibility or take the car back, despite my clear communication about the issue. Additionally, the following issues have also started to occur: The steering wheel becomes stiff suddenly. This resolves temporarily after turning the ignition off and on again. The brake pedal sometimes vibrates as if it’s losing pressure. I can clearly feel this under my foot while braking. Sensor malfunctions have also started…”

“The contact owns a 2016 Ford Fusion. The contact stated while driving at an undisclosed speed, the vehicle independently decelerated, and the vehicle stopped unintendedly. No warning light was illuminated. The contact stated that nearby drivers assisted with pushing the vehicle to the shoulder of the road. The vehicle was towed to the contact's boss's residence. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure and a case was filed. The failure mileage was approximately 246,000.”

“The contact owns a 2016 Ford Fusion. The contact stated that while driving 65 MPH, the vehicle lost motive power. The contact stated that the vehicle failed to exceed 80 MPH while driving. The vehicle started jerking and failed to exceed 60 MPH. The vehicle jerked and then failed to exceed 40 MPH. After refueling, the vehicle was slow to start. The contact had to pump the accelerator pedal for the vehicle to start. The vehicle was taken to an independent mechanic who retrieved DTC: P02, P0087, P0131, P0302, and P1450. The mechanic informed the contact that the vehicle would not pass State inspection. The local dealer was contacted, who confirmed an unrepaired recall. The vehicle was not diagnosed or repaired. The manufacturer was contacted and opened a case. The failure mileage was unknown.”

“The contact owns a 2016 Ford Fusion. The contact stated that while parking the vehicle, the transmission was in park(P), but the vehicle rolled backward. The contact depressed the brake pedal, to stop the vehicle, but after releasing the brake pedal, the failure recurred. The contact depressed the brake pedal again and attempted to shift gear, but the transmission seized. The contact turned off and restarted the vehicle. A transmission message was displayed. The contact activated the parking brake and pressed the manual shift button from reverse(R) to drive(D) to move the vehicle. After shifting into park(P), the transmission seized again. A bystander helped to push the vehicle into a parking space and then activated the parking brake, preventing the vehicle from rolling. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact related the failure to NHTSA Campaign Number: 19V362000 (Power Train); however, the VIN was not included in the recall. The manufacturer was not made aware of the failure. The failure mileage was approximately 145,000.”

“The contact owns a 2016 Ford Fusion. The contact stated that his wife informed him that upon starting the vehicle and attempting to shift to drive(D), the gear shifter was stuck in park(P). The contact inspected the vehicle and noticed that the shifter cable bushing was missing. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 19V362000 (Power Train); however, the failure persisted. The vehicle was towed to the dealer, where it was diagnosed that the shifter cable bushing had rotted away. The dealer recommended the shifter cable bushing be replaced. The vehicle was repaired. The contact was concerned that the repair was temporary because the dealer repaired the vehicle with the same part. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 145,068.”

“I was sitting at a red light and thought I felt my car very lightly shift out of gear. The light changed, I took my foot off of the break and pressed on gas car revved slightly but didn’t move. I placed it in park went back through the gears to drive pressed on the gas and the vehicle went into limp mode was able to pull over to the side of the road. Vehicle was towed to a certified mechanic who advised I need a new transmission. There were no warning indicators no messages NOTHING!”