2018 Ford Mustang engine problems

“The engine has a head gasket defect that leaked coolant into the engine causing misfires and requires a very expensive repair for a defect that came with the engine when it was made. Two Ford dealerships have inspected and confirmed the issue. The car threw codes six months ago and we immediately stopped driving it and had the dealership inspect the problem. We have not fixed it yet as the repair is estimated at 6,000. Parts and labor. It is available for inspection. This seems to be a very common issue with this vehicle. We replaced the fuel rail, spark plugs, and have had an independent inspection by a non affiliated repair shop for a similar price.”

“The 2.3L EcoBoost engine failed due to coolant leaking into the combustion chambers. The dealer found coolant present in cylinders 1 and 4, the cylinder 4 piston washed, and vertical scoring on the cylinder 4 wall. The dealer's recommendation is complete engine replacement. Yes, the engine is available for inspection. The vehicle is currently at the Ford dealership and the engine has not yet been replaced. Coolant entering the cylinders causes misfiring and loss of engine power. The vehicle shook on startup and ran roughly, and the misfire was intermittent and unpredictable. A sudden loss of motive power while driving in traffic or at highway speed is a crash risk to me and to other drivers. Coolant loss into the cylinders also reduces the coolant available to cool the engine, creating a risk of overheating. The vehicle is currently not safe to drive. A Ford dealership has reproduced the issue and confirmed it. The technician retrieved stored codes P0304 and P0316, removed the spark plugs and coils, and borescoped the cylinders. A cooling system pressure test was performed and the vehicle was allowed to sit, after which borescope inspection confirmed coolant in…”

“Check engine light came on Sunday night. Monday had AutoZone check the codes - indicated misfire on two cylinders recommended spark plug replacement - Spark plugs purchased with intent to change Tuesday evening- Tuesday morning -Engine overheated on the way to class added more coolant - got the vehicle home and towed to local Ford Dealership the next day to learn that the coolant was leaking into the engine due to head gasket failure. Ford said the engine needed to be replaced.”

“I own a 2018 Ford Mustang EcoBoost Premium with the 2.3L EcoBoost engine. The vehicle initially developed a check-engine light and was diagnosed with P0303 (Cylinder 3 misfire), P0316 (startup misfire), and P018C (fuel pressure sensor circuit low). On August 24, 2026, all four spark plugs and one ignition coil were replaced, and a fuel/induction cleaning service was performed. The P018C repair was declined at that time. On September 10, 2026, the vehicle started with an extremely rough idle and produced a very large cloud of white, sweet-smelling exhaust smoke. The check-engine light came on. The original codes, including the misfire codes, were present along with additional codes. The vehicle underwent approximately three hours of diagnostics and road testing. The codes were cleared, and afterward only P018C returned. Testing reportedly did not identify a head-gasket leak, but visible white smoke was still coming from the exhaust when I left the repair facility. Possible coolant intrusion involving the turbocharger was discussed, but the source was not confirmed. Later that day, the vehicle would not crank in Park but started in Neutral. While driving home,…”

“I own a 2018 Ford Mustang EcoBoost Premium with the 2.3L EcoBoost engine. The vehicle initially developed a check-engine light and was diagnosed with P0303 (Cylinder 3 misfire), P0316 (startup misfire), and P018C. On August 24, 2026, all four spark plugs and one ignition coil were replaced and a fuel/induction cleaning was performed. On September 10, the vehicle suddenly started with an extremely rough idle and produced a large cloud of white, sweet-smelling exhaust smoke. The check-engine light illuminated and the previous codes returned along with additional codes. The vehicle continued producing white exhaust smoke after several hours of diagnostic testing. Later that day, the engine shook violently while I was stopped at a traffic light and the tachometer fluctuated significantly. On September 11, the check-engine light returned and the previous diagnostic codes were again present. Firestone documented that coolant was present in the exhaust, that the coolant level was low again after coolant had been added the previous day, that the engine was burning coolant and producing white smoke, and that coolant was mixed with the engine oil. Firestone stated the…”

“2018 WITH 118,000 MILES. Had to get a full block engine replacement due to coolant intrusion into the cylinders. This was diagnosed and replaced at a Ford dealership.”