Problems · by component
2018 GMC Sierra 1500 engine problems
67 owner complaints to NHTSA about the 2018 GMC Sierra 1500 cite engine, 22% of all 305 complaints for this model year.
Complaints
67
22% of all complaints
Crashes
0
Reported by owners
Fires
0
Reported by owners
Injuries
0
Reported by owners
What owners say about the engine
Verbatim from NHTSA complaints, newest first
“I was backing out of my garage and truck made strange noise and shut off . Tried to restart but just made ding and wouldn't turn over . Dash lights went blank. Had vehicle towed to shop and mechanic stated it was crank and connecting rods after he dropped the oil pan. I ordered new OEM engine and waiting on delivery . Been 5 weeks now since order . Vehicle only has 106,000 miles on it and have had it since 20,000 miles and all maintenance has always been done . Engine can be inspected at shop as new engine has not arrived”
“CUSTOMER STATES: THINKS CRANKSHAFT PULLEY IS LOOSE DUE TO PRIOR WATER PUMP REPLACEMENT-CRACKSHAFT PULLEY HAS NOTHING TO DO WITH WATER PUMP REPLACEMENT. BEFORE INSPECTING/STARTING ENGINE VERIFIED OIL LEVEL-OIL LEVEL IS ON FULL MARK. STARTED ENGINE-LOUD RATTLING/KNOCKING NOISE FROM ENGINE-ENGINE HAS INTERNAL FAILURE-ENGINE REPLACEMENT IS REQUIRED. ALSO HEARING NOISE IN REAREND-CANNOT TEST DRIVE DUE TO ENGINE CONDITION SEVERAL TSB'S ON ENGINE FAILURES WITH 6.2L ENGINES. GM HAS POSSIBLE RECALLS COMING ON 2019-2024 YR MODELS. NOT SURE IF EARLIER MODELS MAYBE INCLUDED UNDERHOOD INSPECTION 1 7003186 06NS 52.50 52.50 LBR-DISC CUST SAT”
“I own a 2018 GMC Sierra 1500 V8 5.3 liter which is at 46, 433 miles. Over the past few weeks I have noticed the transmission having difficulty shifting in first gear and lurching, and making shuddering noises, and as well making a constant ticking noise. After an experienced mechanic had put a diagnostic system onto my truck, his system diagnosed a Transmission Lifter Failure, specifically 2 out of the 8 lifters. A few days later (9-04-26) I took my truck to a certified GMC servicing business (Patriot Chevrolet of Hopkinsville KY 270-886-1207) and had a transmission servicing done. I had told the Customer Service representative Amanda Williams about the ticking and that I thought 2 lifters going bad in the transmission were the source of it. 3 hours later the servicing was done which cost 474.43. She did not know if the ticking had stopped or not. I started my engine to head home and the ticking was still happening. Nothing had changed. I got home, parked and have not started the engine since to minimize any further damage. I have become aware that this year, make and model has become infamous for the engine/transmission design and parts failure which has been…”
“ENGINE FAILURE, 5/3/22, 23,987 MILES, ALL LIFTERS WAS REPLACED UNDER WARRANTY, ENGINE FAILURE, 7/6/26, 46004 MILES, TOOK TRUCK IN FOR OIL CHANGE AND WHEN RETURNED HAD A TICKING NOISE. DEALERSHIP NOTIFIED ME THAT CAMSHAFT ISSUES AND METAL DETECTED IN OIL. ENGINE NEEDS REPLACED. 6.2 V8 2018. TURPIN MOTORS, GENESEO, IL HAS DONE ALL SERIVCE ON TRUCK. NO WARNING LIGHTS OR CODES. VEHICLE IS IN MY GARAGE AND AVAILABLE FOR INSPECTION. I OPENED CASE WITH GM #105652237. DEALERSHIP OPENED CASE ON GM PORTAL ALSO. RESPONSE FROM GM IS THAT TRUCK IS OUT OF WARRANTY”
“Vehicle Details: 2018 GMC Sierra 1500 Z72 4x4, 5.3L V8 EcoTec3 engine, VIN: [XXX] Mileage at time of incident: 220,000 miles Location: [e.g., Little Rock, Arkansas area or specific road/highway – please provide if desired] What happened: The 5.3L V8 engine’s hydraulic roller lifters failed. One or more lifters collapsed, stuck, or lost proper oil pressure/operation. This led to improper valvetrain function, causing loud ticking/knocking noises, cylinder misfires, significant loss of engine power and performance, and internal engine damage (such as camshaft lobe wear or related components). Component or system that failed or malfunctioned: Hydraulic valve lifters (camshaft followers) in the engine valvetrain, associated with the Active Fuel Management (AFM) system. The failed lifter(s) and related components are available for inspection upon request. How safety was put at risk: The engine malfunction resulted in sudden or progressive power loss and misfiring while driving. This reduced the vehicle’s ability to accelerate or maintain speed, especially in traffic or on highways, creating a hazardous situation that put my safety and the safety of other road users…”
“Incident description: On three occasion I have had the same catastrophic Engine failure putting myself and my family along with the general public in harms way. Starting March of 2022 while driving at approximately 60 MPH on the West Shore Expressway my truck experienced a sudden and total loss of motor power. My engine stalled out and I lost my ability to safety steer and stop my vehicle. This all happened during rush hour while driving in the left lane of traffic. This sudden loss of power forced me to maneuver the vehicle to the right shoulder of the expressway across the right lane of traffic. As there was no shoulder to pull over on the left side of the highway. This created an immediate crash risk for myself and other drivers. Upon inspection at the authorized GMC dealership where I purchased the truck new, a certified mechanic determined that the engine experienced a complete failure requiring replacement or rebuilding of the engine. I paid to have the engine rebuilt at the dealership. The second instance was similar to the above incident. Once again I paid for the repair. The third instance was more dangerous as when my trucks engine failed it almost…”
Showing 6 of 67 reports. Read every report on NHTSA.gov.
Data from NHTSA Complaints API (owner reports, unverified) · synced Oct 30, 2026NHTSA vehicle page
Complaints are unverified owner reports to NHTSA and are not normalized for sales volume. One complaint can cite several components.