Problems · by component

2011 Hyundai Sonata engine problems

968 owner complaints to NHTSA about the 2011 Hyundai Sonata cite engine, 29% of all 3,380 complaints for this model year. NHTSA also lists 2 recalls on this component.

Complaints
968
29% of all complaints
Crashes
19
Reported by owners
Fires
85
Reported by owners
Injuries
15
Reported by owners
01 —Owner reports

What owners say about the engine

Verbatim from NHTSA complaints, newest first
“My 2011 Hyundai Sonata with the 2.4L Theta II GDI engine developed an engine failure at 99,928 miles. On XXX Hyundai’s dealer (McFarland Hyundai, [XXX]) ran Hyundai’s T3G connecting-rod-bearing test, and the engine returned NO PASS. Hyundai’s own test recorded the oil level as full. This engine family is the subject of Hyundai’s connecting-rod-bearing safety campaigns and its extended engine warranty. Hyundai declined the repair (#XXX) as “exceptional maintenance neglect,” although the oil and filter were changed about 730 miles before the failure, with two more documented oil changes in the prior 16 months. Connecting-rod-bearing failure in this engine can cause engine seizure or stalling while driving, which creates a crash risk. The vehicle is at the dealer and has not been repaired. I am reporting this so NHTSA has a record of a Theta II failure in a vehicle covered by these campaigns that was denied repair.”
Owner complaint to NHTSAFiled Oct 18, 2026EngineODI 11771950
“I was driving down the road going the speed limit and all of a sudden it felt like I hit a brick wall my car staked out and I was stuck in the middle of the road for about 20 minutes and finally I got it to start and drove home it did it again 2 months later”
Owner complaint to NHTSAFiled Sep 3, 2026Steering, Electrical system, EngineODI 11762026
“I had taken my Sonata to Mike Miller Hyndia in Peoria,I'll and they agreed to do the recall although they had my vehicle for two weeks. They did not service it and when I picked it up they said I had to drive it till the service engine light come on. I was driving it five days later and heard a loud noise and car started malfunctioning I was stuck in a middle of a intersection and I had to push vehicle off road. I broke my right hand in this process and I have also lost my job I am very concerned why they did not service it after they agreed too and sent me off in it in that condition ..The car is currently parked and unsure what to do with it ..”
Owner complaint to NHTSAFiled Aug 29, 2026Electrical system, Exterior lighting, EngineODI 11760651
“The vehicle suffered an internal connecting rod bearing failure, a known manufacturing defect affecting the Theta II GDI engine. The failure was explicitly diagnosed via the manufacturer - specific OBD-II fault code p1326 Knock Sensor Detector System. This defect causes sudden engine stalling poses an immediate risk of catastrophic engine failure or fire while driving. Hyundai Motor America has denied financial reimbursement for the required engine repair because the work was completed by an independent shop and third-party arbitration deadline (BBB Auto Line) communicated to me. The manufacturer is actively refusing to remedy an acknowledged safety defect.”
Owner complaint to NHTSAFiled Aug 18, 2026EngineODI 11757692
“I test drove the vehicle at an auction, watched several other people test drive the vehicle. Before the auction I test drove it one more time and put my obd scan tool on it to make sure there were no hidden codes or problems. I won the bid,and picked up the vehicle. I drove it approximately 6 miles from the auction and the falshing engine light popped on. I immediately pulled over in heavy freeway traffic. Put my scan tool on it and found out the knock sensor had triggered. The vehicle was shaking and making a terrible racket. It was inoperable in the worst possible spot on Highway 51 during rush hour traffic. I managed to slowing coast down the offramp and roll into a parking lot. I then called Purdy Hyundai and spoke with a service advisor and provided the VIN#. He (Vue Kue) informed me that the vehicle qualified for the recall and warranty work based on exactly that issue. I had the vehicle towed to the Purdy dealership on July 8th 2026. I was told today that it was unlikely that Hyundai would honor the recall because I did not have service records of a vehicle I had owned for 6 miles of driving. I filed a complaint with Hyundai corporate. Claim#43010067 and…”
Owner complaint to NHTSAFiled Jul 22, 2026Vehicle speed control, EngineODI 11752063
“Rod bearing issue due to particles in engine causing engine to not accelerate as normal and jerk when goes over 10 MPH can’t exceed 50 miles causing safety issues and knocking/clicking noise took it to Hyundai and was informed it is apart of the recall but wont replace engine my vehicle has ALL the same issues as the Hyundai recall but my VIN isn’t registered on the site for recall on carfax it shows a pattern of the previous owners being car in for maintenance and engine issues but engine never being replace under recall”
Owner complaint to NHTSAFiled Jul 1, 2026EngineODI 11747821

Showing 6 of 968 reports. Read every report on NHTSA.gov.

Data from NHTSA Complaints API (owner reports, unverified) · synced Nov 10, 2026NHTSA vehicle page
02 —Related recalls

2 recalls on this component

Engine

Free remedy

Hyundai Motor America (Hyundai) is recalling certain 2011-2014 Sonata and 2013-2014 Santa Fe Sport vehicles previously repaired under recall numbers 15V-568 and 17V-226. The high pressure fuel pipe that connects to the fuel pump outlet may have been damaged, misaligned, or improperly torqued during the engine replacement procedure, allowing fuel to leak from the pipe.

EngineReported Dec 28, 2018NHTSA 18V934000

Engine

Remedy pending

Hyundai Motor America (Hyundai) is recalling certain model year 2011-2012 Sonata vehicles manufactured December 11, 2009, to April 12, 2012 at Hyundai Motor Manufacturing Alabama and equipped with either a 2.0 liter or 2.4 liter Gasoline Direct injection engine. In the affected vehicles, metallic debris may not have been fully removed during manufacturing of the engine crankshaft. If the debris was not completely removed, oil flow may be restricted through the connecting rod bearings, causing connecting rod damage. A worn connecting rod bearing will produce a metallic, cyclic knocking noise from the engine and possible engine failure.

EngineReported Sep 10, 2015NHTSA 15V568000
Data from NHTSA Recalls API · synced Nov 10, 2026

Complaints are unverified owner reports to NHTSA and are not normalized for sales volume. One complaint can cite several components.