2013 Jeep Wrangler fuel/propulsion system problems

“This vehicle is notorious for a common issue yet that same issue which has not been recalled is the reason my engine blew on the highway and Jeep has failed to notify owners of this issue or give some sort of reimbursement. My Jeep was cruising just fine when my engine suddenly blew, it was well maintained and taken care of. Despite the great care the oil housing unit which many others have complained about cracked leaking all the oil in a matter of minutes. This essential piece failing and releasing all the oil caused my engine to blow. Jeep is notorious for having a plastic oil housing unit with no heat shield since it is inbetween both engine bays. Having the unit where it is while creating the piece out of plastic seems like a text-book way to have catastrophic failure and further profit off complete engine failure. This material design flaw has now cost me nearly $800 come to find out I need a total engine replacement now which will be around $4000. This is completely unacceptable a vehicle was allowed to be put on the road with such a catastrophic design flaw and physically endangered me when this happened. In the attached files you can see the pooling of…”

“The components in the N28 / NHTSA 13V-234 recall did exactly what they were recalled for. My check engine light came on a few months back so I brought it to be diagnosed at a parts store and diagnostic scanner listed P codes for possible O2 sensor. I brought my 2013 Jeep Wrangler Sport into a Jeep dealership(#1) in Friday, November 1st, 2024 and upon the first inspection, they found a couple of issues and printed an quote for $127.33, I signed off on that quote. Then another hour or 2 passed by, they brought me a revised quote for over $600, which I was still okay with and signed off to have repaired. Then they offered to bring me home after hours of sitting in the lobby. The next day, I get a link to review the revised inspection and it was over $2400. The engine charge was over $1900 caused by the N28 recall. I asked them to just do the recall because I could not afford it the remaining. Upon looking into forums, documents & diagrams researching online specific to the N28 recall, I reached out to the manufacturer quite a few times by phone and email. I was working with someone who I thought would be helpful, since he suggested I call a different Jeep…”

“The fuel supply line that attaches to the fuel rail at the engine sprung a leak at the seam were the plastic tube is sealed together. This is a high pressure line. This resulted in fuel being sprayed directly on the hot cylinder head creating a potential fire hazard.”

“The oil pressure sensor, I was in traffic and the vehicle came to a stop with scared the hell out me and this has hall a couple of time and came to find out it was caused by the oil pressure sensor. Why this is not on recall”

“fuel supply line going to the engine leaking gas directly onto engine. I started smelling gas and upon inspection found the leak. I googled it and found numerous links with people having the same issue. Definitely poses a safety hazard.”

“The Fuel Supply Tube part #68141849AD cracked, causing fuel to leak into the engine bay when the car was started. The entire cabin filled with gas fumes so intensely my eyes would water.”