2015 Jeep Wrangler engine problems

“I purchased this 2015 Jeep Wrangler Rubicon new and have maintained and serviced it regularly. At approximately 75,000–80,000 miles, the engine began developing a ticking noise from the passenger/right cylinder head area. The problem progressively worsened. At approximately 100,000 miles, repairs were performed involving the right-side cylinder head and camshaft because of camshaft/valvetrain wear and a persistent cylinder #2 misfire. The right-side cylinder head/camshaft area has required repair more than once. Rocker arms were also replaced, but the underlying problem continued. The vehicle now has approximately 150,000 miles. The engine recently shut down and developed a loud mechanical noise. Upon inspection, significant wear/damage was again found involving the right-side exhaust camshaft/valvetrain, and there are concerns involving the timing chain/tensioning system. A failure of these components while driving could cause sudden engine shutdown or loss of power, creating a safety risk. The vehicle has also developed electrical/safety-related problems. The airbag warning light is illuminated, and the steering-wheel controls and steering-wheel illumination…”

“From September 2024 I have a problem with the engine system make a noise i always make oil change on time and also electric problems and seatbelts problems l know a 2 3 owner off jeep wrangler with the same problem”

“In October 2025, the Anti-lock Breaking System (ABS) Brake, traction control, downhill control indicators all illuminated. This also impacts cruise control and acceleration from a stopped position. My repair technician placed an order for the necessary ABS control module with MOPAR. The expected delivery date was August 2026. In August 2026, MOPAR informed them the part was on a nationwide back order with no ETR for resolution. I placed an order for the ABS Module in August 2026, with a suggested date of delivery in two weeks. MOPAR has advised us today 18 August 26, there is no ETR for this critical component to be available. Anti-lock brakes are federally mandated in all vehicles 2012 and beyond. Not having this module disables multiple required safety components in the vehicle not just ABS and puts the consumer, other drivers at risk.”

“am the original owner of this 2015 Jeep Wrangler, which I purchased new. The vehicle has been properly maintained according to the manufacturer's recommended maintenance schedule. I have records documenting routine maintenance, including regular oil changes. At approximately 75,000 miles, I began hearing a persistent ticking noise from the engine. Because I was concerned that the noise could indicate a mechanical problem, I scheduled an inspection with an authorized Jeep dealership. The dealership diagnosed the vehicle with a failed rocker arm that caused damage to the exhaust camshaft. The dealership advised that the intake camshaft remained in good condition, indicating that the failure was isolated to the exhaust valvetrain at the time of diagnosis. This type of internal engine failure at approximately 80,000 miles was unexpected for a properly maintained vehicle. My concern is that if this condition is not diagnosed promptly, continued operation could result in further engine damage, loss of engine performance, engine misfire, or potential engine failure while the vehicle is being driven, creating a potential safety hazard. While researching this issue…”

“I purchased a used 2015 Jeep Wrangler from a dealership in New York. At the time of sale, the vehicle had an open urgent safety recall (19V-018) for a defective Takata passenger airbag inflator. This recall was never disclosed to me by the dealership prior to or at the time of purchase. The recall advisory was noted on the NYS inspection report conducted the same morning the vehicle was sold to me, but was not communicated to me in any way. I discovered the open recall after experiencing repeated mechanical failures following purchase. Four days after purchase the vehicle overheated and had to be towed — the coolant system was found to be completely empty. An independent licensed mechanic subsequently inspected the vehicle and stated on record that the mechanical defects appeared to be pre-existing conditions that existed prior to the sale. The vehicle currently has an unrepaired Takata airbag inflator which the manufacturer has identified as capable of exploding and sending metal fragments into the vehicle interior at high speed, risking serious injury or death to occupants. The vehicle is available for inspection upon request. The recall remains unrepaired.…”

“ABS Module error: C2200 causes jeep to go into limp mode when accelerator is pushed hard. near miss on collision, lack of abs causes skidding and possible loss of control.”