2022 Kia K5 electrical system problems

“- The exact component that failed has not yet been determined. The vehicle experienced a sudden loss of acceleration while driving, followed by a popping noise, smoke, and a fire that severely damaged the vehicle. The vehicle is a 2022 Kia K5 GT-Line, VIN [XXX]. The vehicle has an open Safety Recall SC356 / NHTSA Recall 25V794 involving the purge control system check valve and fuel tank, which may result in fuel leakage and an increased risk of fire. The recall repair had not been performed prior to the incident. The vehicle is currently being preserved and is available for inspection upon request. - The vehicle caught fire while driving on XXX, in [XXX]. The vehicle suddenly stopped accelerating, a popping noise, and then smoke began coming from the vehicle shortly afterward. The vehicle subsequently caught fire and was destroyed. The incident created a serious risk of injury to me, other occupants, nearby motorists, and others in the area. Fortunately, there were no injuries. - The cause of the failure and fire has not yet been confirmed. The vehicle was severely damaged by the fire. The vehicle has an open Kia SC356 / NHTSA 25V794 safety recall, which we…”

“All lights on dash appear. Forward collision warning, blind spot warning, other warnings. Car loses ability to accelerate for a few moments and makes unsafe to drive. RPM needle bounces.”

“My 2022 Kia k5 has gone into limp mode multiple times now while I am driving in addition to when it starts up. Check engine light, AUTOHOLD, EPB, traction control, etc. all aluminate on my dashboard. Car drives very rough and doesn’t want to accelerate or shift. Huge safety issue. Dealership said it was the throttle body assembly. Paid to have it replaced and the issues still persists. I have read multiple other comments with the same issue and dealerships have no idea what the issue is or how to correctly diagnose. Error codes were P00BD00, C136081, and C174181.”

“The ac and or heat goes out and I have to press the fuse under the hood and it comes back on other Kia k5 owners have had the same problem was told to report here for recall so fuse box doesn’t get burned out.”

“I noticed my car jerking from a stopped position a few months back it wasn’t consistent but it happened I figured it was just a powerful motor however last on October 7th I was driving down the street to go to the dealership and my car lost power I had to pull over my son was panicking he’s just little and I sat there and luckily it started after a few minutes and I went to the dealership and they blew me off saying it has electrical issues. WELL I went to Oreillys and they tested my battery it was good but only getting 10 % charge to it which he said was odd so he said to try and drive it some and come back he wlll see where it’s at. I did that and he said oh wow you’re back up to 100%! Well that was the 7th now last night I’m driving around Tallmadge ave and BOOM everything lit up I lost power steering my lights shut off completely and it was close to midnight! It was insane I am luckily a very good driver because I almost went right off the road!”

“Kia dealership has confirmed that the components of the vehicle's multi-fuse (located under the hood) for the AC/HVAC system have started to burn and are melting part of the fuse panel due to excessive current draw and excessive heat. Due to this, the vehicle's HVAC (both heat and a/c) does not function. A vehicle's HVAC functions help to: 1) Defrost/defog vehicle's windows during rainy and humid days, 2) maintains a vehicle's air quality, 3) cools the vehicle's interior on hot and humid days, 4) assists in preventing mold and bacteria growth via dehumidification, 5) assists in keeping the cabin cool and dry to prevent driver fatigue and promote driver focus. Other than the inoperability of the HVAC system, no other signs or symptoms were present prior to the issue. I initially though this issue would be covered under Kia's HVAC Blower technical bulletin/warranty (WTY037) however the dealership has advised that the WTY037 only applies if the fuse is blown, not melted. This slight difference in melting vs. blowing should be an issue as the effect of the issue is the same, but components melting seems to be slightly more serious, but is not covered. Also, melting…”