2018 Ram 1500 power train problems

“San Antonio Tx was driving this morning in a light mist had my son in the truck the vehicle ahead of me came to an abrupt stop and I had to hit my brakes pretty hard and without the abs working properly I am impacted by the ABS controller failure However, I was surprise at how few have files formal NTHSA complaints on a serious issue that appears to impact thousands of trucks prior to 2019. The only way to move this ball forward and get injunctive relief is to inform NTHSA. To Whom It May Concern at NHTSA, I am filing this safety complaint regarding a defective ABS Hydraulic Control Unit (HCU) on my 2018 Ram 1500 TRADESMAN CREW CAB 4x4 5.7L Hemi with approximately 200,000 miles. DEFECT DESCRIPTION: The ABS HCU has failed, resulting in complete loss of anti-lock braking, traction control, electronic stability control, 4WD and cruise control. This is an identical failure mode to the defect addressed under NHTSA Recall 24V-896, which covered 2017-2018 Ram 2500-5500 trucks. My 2017 Ram 1500 uses the same or substantially similar HCU component and is experiencing the identical failure. SAFETY RISK: The loss of ABS, ESC, 4WD and traction control significantly…”

“XXX, [XXX] East Bound 9:30 PM, , pulling a tandem-axle boat and trailer 6000# GVW , the truck slowed suddenly, in traffic 62 MPH. I contacted CJDR dealers in [XXX], and [XXX], and both stated there was no recall, warranty, or goodwill repair, available for my truck. [XXX] told me the same, when I called. I took the truck to an independent diesel shop, in [XXX] to just go ahead and have a CPS (crankshaft position sensor, and tone wheel) put in. He said both the CJDR dealers and Stellantis told him the truck was “ineligible” for the repair parts kit – he was unable to obtain one. They claimed *my* truck did not have the faulty tone wheel assembly. In the mean time, the code he documented P0335, did not return, and I continued to drive the truck, until XXX, 11:00PM I-4 [XXX] about the 106MM, the truck did the same thing, same trailer, same danger. After restart, limping home, OBDii code P0335, was present. On XXX, I took the truck for diagnosis, to New Smyrna CJDR, and they completed replacement of the CPS and tone wheel, today, XXX. The repair cost me 3,470.98 on Invoice Number XXX. I purchased the truck from New Smyrna CJDR, three months after it was built,…”

“Took truck in for warrenty work, engine started nocking techs checked said rod could come through side of engine, Ram know this but refuse to do anything. truck has less than 70000 miles was told 17000 dollar for new motor and install, and there still other issues with this truck, why no recall, this seem to be a problem with 3.0 eco diesel and Ram reufes to recall, now I'm in a bad situation, i paid 25000 last July from a private sale, truck ran great till week ago im a honorable vetran on a 40 percent VA disability claim i would like some help getting some of my money back. Please advise”

“My 2018 Ram 1500 Ecodiesel failed during acceleration on a busy freeway at 70 mph. I was able to avoid traffic and coast to the right shoulder. After paying for a tow, my scan tool called out four permanent codes: P0336, P061C, P062B, and U1401, proving the unsafe stall was directly caused by a delaminated or broken tone wheel. This failure is the root cause behind my open safety recall 66A. However, recall 66A only calls for a software fix and does not address my hard no-start condition. Since my Ram 1500 was manufactured in April of 2018 and the X94 warranty extension cut off date is March 26, 2018, I have no recourse to force FCA to address my failed tone wheel related to and actually the root driver behind the 66A safety recall. I intend to request FCA perform a "Goodwill" repair of the tone wheel. My complaint is I do not have a way forward to get my truck road worthy and safe under recall 66A. FCA cannot perform 66A on my Ram since the software repair cannot be completed while the truck is in a hard no-start condition due to the root driver behind the 66A safety recall. I should not be required to pay for a component known by FCA and the NHTSA to be the…”

“The contact owns a 2018 Ram 1500. The contact stated that while the vehicle was turned off and in park(P), the gear shifter could be moved out of the park(P) position without depressing the brake pedal. Due to the failure, the vehicle would roll forward which caused a potential safety hazard. Upon investigation, the contact discovered NHTSA ID Number: 18V100000(Power Train); however, the contact's VIN was not included in the recall. The vehicle had yet to be serviced or diagnosed for the failure. The dealer nor the manufacturer had been notified of the failure. The vehicle was not repaired. The failure mileage was approximately 52,000.”

“while driving down the highway at 50-70 mph, when attempting to pass I give it more gas and I hear a clunk with the loss off power!, I have to allow to slow down then slowly increase speed! I have my second factory installed transmission @ 40,000 miles!”