2012 Subaru Outback engine problems

“Vehicle stalls when stopping. This is a huge safety issue because stalling at intersections can cause accidents. Dealership diagnosed a faulty torque converter. This torque converter (it should be part number 31100AB170) issue is widely known in this production series of the Subaru outback. After hundreds of complaints were filed with the NHTSA, Subaru extended the warranty on all their automatic transmissions to avoid a recall around 2017, but closed the extended warranty in 2022. Subaru now tries to convince their customers that these vehicles are too old for the issue to be attributable to them, despite knowing that they equipped these vehicles with defective parts. See the following: [XXX] [XXX] [XXX]”

“Just after 100k mile service, car began to shutter when slowing and then stalls at stops. Eventually after I leave it in neutral for up to 2-20 min it will finally restart. First time it happened it wouldn’t start. I had to push vehicle out of major intersection to avoid being hit then pay to tow it to nearest mechanic. Once there, it restarted and problem couldn’t be replicated nor did it relay any codes. Happened again the next two occasions I drove it so I immediately took it to Subaru dealer using side streets to avoid potential accident. After researching my model/year and symptoms, I found this was a common complaint with 2012 Outback’s and there have been numerous CVT issues. One of these issues is a faulty torque converter that causes stalling and usually appears around 100k mile mark (of course just shy of warranty). In 2017 (prior to owning car) a bulletin was released notifying dealers of issue which led to extension of warranty due to customer complaints. Given this new information, I was not shocked when dealer diagnosed my car as needing a new torque converter. Had I known this was an issue beforehand, I would have requested an inspection when…”

“The car stalls out at stops. It shutters and them stalls like a 5 speed car. I have almost been rear-ended on a couple occasions. It is now in the shop for a torque converter replacement”

“When coming to a quick or hard stop, car will rumble then stall out. To confirm that the issue is transmission based I shift the car into neutral then brake quickly and the issue does not arise.”

“No issues with the car since I bought it new and was dedicated to regular Maintenance. Less than a week after a regular scheduled oil change and driving on the main interstate highway cruising at 65mph, the car just suddenly jerked. I thought I had blown a tire but the Brake light came on and then soon after the engine light came on. I was able to get off the highway but the acceleration decreased to a slow crawl. I had it towed to the nearest Subaru dealership that morning in which they said the issue is that both 1 and 4 are not correctly firing. They checked the spark plugs and checked the injector, but both did not fix the issue. They have now told me that they need to get the engine pistons/valves "machined". They are reaching out to Subaru to see if they can help since there is nothing I could have done to prevented this issue and they are hearing more of this issue occurring in Subaru cars. I'm praying that Subaru will help me with my vehicle but am waiting to hear from the Subaru dealership.”

“The engine shuts off while driving, especially when switching gears or when braking too hard (such as when traffic ahead suddenly stops). I had the engine shut off while I was making a left turn at an intersection and lost control abilities of the steering wheel.”