2013 Toyota Prius Plug-in Hybrid electrical system problems

“While driving on Highway 316E on March 31, 2022, at approximately 10am, at some point, as traffic started to slow down and I applied my brakes I was dumbfounded when my car would not stop! It was frightening, as I watched my car get closer and closer to the large truck in front of it. I kept applying the brake and then pumping the brake. The brakes kept failing and had no pressure or tension in them to stop the car. The brake pedal was flat on the floor. But, thanks to a sufficient distance between my car and the truck in front of it, it rolled to a stop just short of crashing into the back of said truck by an inch or two. Sometime in October of 2024 , I spoke with a Service Rep at Marietta Toyota about a whizzing sound that appeared to be coming from under the hood on the driver’s side. This sound would occur while I was driving and even when I turned the car off. It would continue making this whizzing sound sometimes for as long as 45 minutes after the ignition was turned off. I took the car back to Marietta Toyota and the service rep said the problem was related to the weather. On December 24, 2024, at around 11:00am EST, I parked my car in the parking lot…”

“The brake booster assembly (part number 47070-47060) on my 2013 Toyota Prius has failed. This component is critical to the proper functioning of the braking system. It is currently still installed in the vehicle and available for inspection upon request. As a result of the failure, the ABS warning light, traction control light, and brake warning light are all illuminated on the dashboard. The braking performance has noticeably declined — the pedal feels inconsistent and at times unresponsive. This has created a significant safety risk while driving, especially during sudden stops or in wet conditions, as it compromises the vehicle's ability to brake efficiently and predictably. The issue has been confirmed by a Toyota dealer (or independent mechanic if that’s the case — feel free to change this line accordingly). The dealer diagnosed the issue as a failure of the brake booster assembly, which aligns with known failures reported by many other 3rd-generation Prius owners. The vehicle has not been involved in an accident, and has not been inspected by the police or insurance representatives. Toyota previously issued a Customer Support Program (CSP ZJB or ZG1)…”

“While driving on the highway, ABS, "Brake"/E-Brake, Traction Control Lights lit up all at the same time out of the blue. No prior engine lights/codes before this incident. During that trip, brakes felt more difficult to press, loss all brake regeneration for the hybrid battery but was still about to brake for that entire 100 miles trip. As of now, the car is still able to brake but it looks like it's just primarily using the mechanical brakes all the time now. It still has that different brake feel compared to when before all those engine lights went on. Regenerative braking is no longer working. Brought the car to the shop at was given the error codes C1391 and C2315.”

“I was driving and suddenly the car started beeping and the brake, e-brake, abs, and traction control lights came on. As soon as I found an opportunity I tried to brake but the car would not stop and the brake pedal became really hard. I had swerve to avoid hitting cars in front of me. It was the scariest moment of my life. I shifted the car from D to B to use the engine braking. I finally was able to slow down enough to turn right on a side Street and pushed on the brake pedal with all my strength and it finally came to a stop. I was lucky I didn't have a collision or strike a pedestrian, that I also drive defensively and leave enough space in front of me, and that I was on a surface street and not on a freeway which I frequently use because if I was I would have surely crashed. This is NOT right. Brakes should NOT suddenly fail! Under any circumstances. It was confirmed by a mechanic that it's the BRAKE BOOSTER AND BRAKE BOOSTER PUMP ASSEMBLIES had failed and had the following codes C1252, C1253, and C1256 were found. The same issue and codes reported in tsb pol18-03.”

“The contact owns a 2013 Toyota Prius. The contact stated while driving approximately 5 to 10 MPH, the vehicle stalled. The contact was able to restart the vehicle, but the failure persisted. There were no warning lights illuminated. The vehicle was taken to an independent mechanic, who replaced the battery on two occasions, but the failure reoccurred. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 173,699.”

“Took vehicle for state inspection on 2/13/2024, failed inspection because of brake warning lights. Slip indicator, Electronically controlled brake warning light, Brake warning light, Anti-lock brake system, and Low tire pressure lights are all on. I have looked into it, and it seems the brake actuator/booster used to be under warranty, however since this is a 2013 in 2024 with almost 210k miles on it, it no longer qualifies for the original recall.”