53 owner complaints to NHTSA about the 2002 Toyota Sequoia cite suspension, 8% of all 692 complaints for this model year. NHTSA also lists 1 recall on this component.
“To whom it may concern, I recently purchased a 2002 Toyota sequoia. I brought the truck to a local shop for a (overall assessment of the vehicle) since I just Purchased it. The shop owner ( I have their name address if needed). The chassis is rusty and has holes sue to rust. If someone can get back to me It’s much appreciated”
“Rack and pinion rusted out and had to be replaced. It cracked in the middle of the highway and left me inching to safety. Never fully recovered 186k, frame is fully rusted and will not pass inspection due to faulty oxygen sensors and excessive rust and corrosion. Will need to replace exhaust to input a new sensor at 4k Vechicle is fully operable and functional but cannot pass inspection without the safety of rust treatment or replacement It’s a great vechicle but unfortunate that the 2002 series is left out of the recall . There are a lot of early generations that have these issues and although the trucks are reliable and have a long life , are undriveable because they can’t pass inspection. Please consider extended the rust recall to 2001-2003 Sequoias. This was my grandfathers truck and really would like to keep his memory in the family and drive my grandfathers truck as it still runs perfectly but has on going issues with rust and frame issues . There was an extended warranty for 2002 Sequoias that expired in 2014. This is a point where most Sequioas weren’t experiencing this issue. Dealership or recall will not honor and denied any claim for rust It is…”
“On parkway 50 to 55 mph driver side ball joint broke. Truck could of flipped or hit another vehicle. Could of caused damage to my body or death. No warning of impending breakage. I do have pics of broken balljoint and it did cause damage to driverside fender. Frame is rusting. Worried about frame unsafe could brake at any time. Toyota refuses to check and replace.”
“The frame of the vehicle has severe rust and now has holes in the frame, making it unsafe to drive and possibly causing an accident. Meticulous care has been taken of this vehicle and it is never taken off road or abused. I’ve had several other vehicles and have never had this frame rust safety issue.”
“The left rear frame broke away from rear sway bar. I was just leaving my house when I heard a thunk. I noticed the problem when I turned onto the faster road as I accelerated the whole backend moved right, pushing the front end left (into oncoming traffic). Letting up on the accelerator cased the reverse to happen, the back end swung left and the front turned right. So, glad it happened slower streets and not the highway. There was a limited service recall on this model to coat with a rust proofing paint and we had the service done in 2012. This failure would have probably killed someone if it had happened on the freeway or cloverleaf. These vehicles should be either repaired by Toyota or off the road.”
“THE VEHICLE WAS RAISED TO PERFORM AN OIL CHANGE, AND THE TECHNICIAN NOTICED THE FRAME HAD HOLES IN IT FROM RUST. HE EXPLAINED THAT THE ENTIRE BODY AND SUSPENSION WAS CONNECTED TO THIS, AND IF A COMPONENT CAME LOOSE THE VEHICLE COULD CRASH. TOYOTA WAS NOTIFIED ABOUT THE ISSUE, BUT DID NOT TAKE ACTION.”
Showing 6 of 53 reports. Read every report on NHTSA.gov.
ON CERTAIN SPORT UTILITY VEHICLES, DUE TO A MANUFACTURING ISSUE IN THE FRONT SUSPENSION LOWER BALL JOINT, THERE IS A POSSIBILITY THAT THE SURFACE OF THE BALL OF THE JOINT MAY HAVE BEEN SCRATCHED. THE BALL JOINT MAY EVENTUALLY EXPERIENCE EXCESSIVE WEAR AND LOOSENESS, RESULTING IN INCREASED STEERING EFFORT.
Complaints are unverified owner reports to NHTSA and are not normalized for sales volume. One complaint can cite several components.