B009EBody · Airbags & restraintsGeneric (SAE) code

B009E: Right Side Restraints Sensor 5

Fault on right-side restraints sensor 5.

Typical labor cost
$125–$500 est.
1 h–4 h at an assumed $125/hr · parts extra · use your rate
Most common fix
Side impact sensor failed
DIY difficulty: Moderate · usually a shop job
01 —What it means

What B009E means

B009E is a generic OBD-II body code in the airbags & restraints group.

B
Body
0
Generic (SAE)
0
Subsystem group
9E
Specific fault
How to read B009E. We group it under Airbags & restraints.
Check engine light
Usually on
Emissions-related
No
Limp mode possible
Not typical
Drive cycle to clear
Not required
Code data: OBDex (CC0)

Get it fixed

Post this code once and get quotes from local mechanics. Free to post.

Your car Optional

Makes the repair and parts links below specific to your car. Kept in this browser only.

Get quotes on findmechanic.ai (opens in a new tab)
02 —Symptoms

Symptoms

What drivers typically notice
  • Warning light or symbol related to the affected system
  • Comfort or safety function impaired
Code data: OBDex (CC0)
03 —Causes

Common causes

Ranked from most to least likely
  1. 01Side impact sensor failedMost likely
Code data: OBDex (CC0)
04 —Severity

Can I drive with B009E?

Urgent

The car drives, but it is a safety risk.

With an airbag or restraint fault stored, one or more airbags or pretensioners may not deploy in a crash. Get it diagnosed soon and do not ignore a lit airbag light.

Why we rate it urgent

  • An airbag or seat-belt pretensioner may not work in a crash
  • Turns on the check engine light

Severity is our rule-based rating from the code’s flags in OBDex and the system it affects, not an inspection of your car. If the check engine light is flashing, or you notice overheating, low oil pressure, or brake or steering problems, stop driving and get help.

Code data: OBDex (CC0)
05 —Diagnosis

How to diagnose B009E

General procedure — follow the service manual for your vehicle
  1. 1

    Confirm the code and save freeze-frame data

    Read the codes with an OBD-II scan tool and note every code, not just B009E. Save the freeze-frame data (speed, load, temperature when the fault set) before clearing anything; it tells you when the fault happens.

  2. 2

    Check for related codes first

    Look for B009D, B009F. Related codes often share a cause; a circuit or sensor code usually needs fixing before a performance code like this one.

  3. 3

    Check live data

    Watch the related sensor and actuator readings in live data (Right side restraints sensor 5, Sensor wiring) and compare them with expected values in the service information for your vehicle.

  4. 4

    Test the likely causes in order

    Start with the most likely cause and work down: Side impact sensor failed. Test before replacing parts.

  5. 5

    Check for recalls and service bulletins

    Look up recalls for your exact vehicle with its VIN, and ask a dealer about technical service bulletins (TSBs). Manufacturers sometimes issue software updates or extended warranties for known faults.

  6. 6

    Clear the code and verify the repair

    After the repair, clear the code and drive the car under the conditions in the freeze-frame data to confirm it does not return.

Code data: OBDex (CC0)
06 —Cost

B009E repair cost estimate

Labor only — set your local shop rate
Labor estimate for B009E
$125–$500
1 h–4 h of labor × $125/hr (assumed rate) · parts extra

Estimate, not a quote. Labor times are typical ranges for this code from OBDex, and $125/hr is an assumed rate. Shop rates and labor times vary by vehicle and region. Diagnosis time may be billed separately.

DIY difficulty
Moderate
Good DIY job?
Usually a shop job

Needs a scan tool and some experience with testing.

Code data: OBDex (CC0)
07 —Components

Parts and systems involved

  • Right side restraints sensor 5
  • Sensor wiring
Code data: OBDex (CC0)
09 —FAQ

B009E FAQ

What does B009E mean?

B009E means “Right Side Restraints Sensor 5”. Fault on right-side restraints sensor 5.

Is B009E serious? Can I keep driving?

We rate B009E as urgent severity. The car drives, but it is a safety risk. With an airbag or restraint fault stored, one or more airbags or pretensioners may not deploy in a crash. Get it diagnosed soon and do not ignore a lit airbag light.

What causes B009E?

The most common causes, from most to least likely: Side impact sensor failed. Test before replacing parts, because several causes can set the same code.

How much does it cost to fix B009E?

Typical labor is about $125–$500 at an assumed $125/hour shop rate, plus parts. That is an estimate, not a quote: labor times and rates vary by vehicle and region, and diagnosis may be billed separately.

Can I fix B009E myself?

DIY difficulty is moderate. Most owners leave this to a shop because it needs involved testing or specialist tools. Always confirm the cause before buying parts.

Will B009E clear itself?

If the fault was intermittent, the warning may go off once the computer stops seeing it, but the code stays in memory. Fix the cause; clearing the code alone doesn’t repair anything.

Code data: OBDex (CC0)