C05D6: Power Steering Control Module Processor Performance
Power steering control module processor reports an internal performance fault.
What C05D6 means
C05D6 is a generic OBD-II chassis code in the steering group. In plain English: the signal is within electrical limits but doesn’t make sense compared with other readings, so the part or system isn’t performing as expected.
- Check engine light
- Usually on
- Emissions-related
- No
- Limp mode possible
- Yes
- Drive cycle to clear
- Required
Get it fixed
Post this code once and get quotes from local mechanics. Free to post.
Makes the repair and parts links below specific to your car. Kept in this browser only.
Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Common causes
- 01Module internal faultMost likely
- 02Module software outdated, reflash may resolveLess likely
- 03Supply voltage outside specificationLess likely
Can I drive with C05D6?
Drive carefully and get it checked soon.
Steering assist may drop out, making the wheel heavy at low speed. Avoid driving if steering becomes very heavy or erratic.
Why we rate it urgent
- Steering assist may be reduced or lost
- Can put the vehicle in limp mode (reduced power)
- Turns on the check engine light
- Needs a drive cycle to confirm a repair
Severity is our rule-based rating from the code’s flags in OBDex and the system it affects, not an inspection of your car. If the check engine light is flashing, or you notice overheating, low oil pressure, or brake or steering problems, stop driving and get help.
How to diagnose C05D6
- 1
Confirm the code and save freeze-frame data
Read the codes with an OBD-II scan tool and note every code, not just C05D6. Save the freeze-frame data (speed, load, temperature when the fault set) before clearing anything; it tells you when the fault happens.
- 2
Fix other faults first
If other codes are stored, start with power-supply, sensor-circuit and communication codes. They can cause this code as a side effect.
- 3
Check live data
Watch the related sensor and actuator readings in live data (EPS module) and compare them with expected values in the service information for your vehicle.
- 4
Test the likely causes in order
Start with the most likely cause and work down: Module internal fault; module software outdated, reflash may resolve; supply voltage outside specification. Test before replacing parts.
- 5
Check for recalls and service bulletins
Look up recalls for your exact vehicle with its VIN, and ask a dealer about technical service bulletins (TSBs). Manufacturers sometimes issue software updates or extended warranties for known faults.
- 6
Clear the code and verify the repair
After the repair, clear the code and complete a full drive cycle (cold start, idle, steady highway cruise, deceleration). The code is fixed when the related readiness monitor completes without it returning.
C05D6 repair cost estimate
Estimate, not a quote. Labor times are typical ranges for this code from OBDex, and $125/hr is an assumed rate. Shop rates and labor times vary by vehicle and region. Diagnosis time may be billed separately.
- DIY difficulty
- Hard
- Good DIY job?
- Usually a shop job
Involved testing or major parts. Most owners use a shop.
Parts and systems involved
- EPS module
C05D6 FAQ
What does C05D6 mean?
C05D6 means “Power Steering Control Module Processor Performance”. Power steering control module processor reports an internal performance fault.
Is C05D6 serious? Can I keep driving?
We rate C05D6 as urgent severity. Drive carefully and get it checked soon. Steering assist may drop out, making the wheel heavy at low speed. Avoid driving if steering becomes very heavy or erratic.
What causes C05D6?
The most common causes, from most to least likely: Module internal fault; Module software outdated, reflash may resolve; Supply voltage outside specification. Test before replacing parts, because several causes can set the same code.
How much does it cost to fix C05D6?
Typical labor is about $125–$625 at an assumed $125/hour shop rate, plus parts. That is an estimate, not a quote: labor times and rates vary by vehicle and region, and diagnosis may be billed separately.
Can I fix C05D6 myself?
DIY difficulty is hard. Most owners leave this to a shop because it needs involved testing or specialist tools. Always confirm the cause before buying parts.
Will C05D6 clear itself?
Once the fault is fixed, the check engine light usually goes off by itself after the system passes its self-test over several drive cycles. Clearing the code with a scan tool resets readiness monitors, so an inspection station may turn you away until a full drive cycle is completed.