P055B: Engine Oil Pressure Sensor or Switch B Range or Performance
Same as P055A with the signal in plausible range yet not matching the engine model.
What P055B means
P055B is a generic OBD-II powertrain code in the speed, idle & cruise group. In plain English: the signal is within electrical limits but doesn’t make sense compared with other readings, so the part or system isn’t performing as expected.
- Check engine light
- Usually on
- Emissions-related
- No
- Limp mode possible
- Not typical
- Drive cycle to clear
- Not required
Get it fixed
Post this code once and get quotes from local mechanics. Free to post.
Makes the repair and parts links below specific to your car. Kept in this browser only.
Common causes
- 01Sensor element driftedMost likely
Can I drive with P055B?
Not until oil pressure is confirmed.
Check the oil level first. If the oil-pressure warning light is on, switch the engine off: running without oil pressure can seize the engine. If the level is fine and the light is off, it may be the sensor, but confirm with a mechanical gauge.
Why we rate it urgent
- Low oil pressure can destroy an engine within minutes
- Turns on the check engine light
Severity is our rule-based rating from the code’s flags in OBDex and the system it affects, not an inspection of your car. If the check engine light is flashing, or you notice overheating, low oil pressure, or brake or steering problems, stop driving and get help.
How to diagnose P055B
- 1
Confirm the code and save freeze-frame data
Read the codes with an OBD-II scan tool and note every code, not just P055B. Save the freeze-frame data (speed, load, temperature when the fault set) before clearing anything; it tells you when the fault happens.
- 2
Fix other faults first
If other codes are stored, start with power-supply, sensor-circuit and communication codes. They can cause this code as a side effect.
- 3
Check live data
Watch the related sensor and actuator readings in live data (Oil pressure sensor B) and compare them with expected values in the service information for your vehicle.
- 4
Test the likely causes in order
Start with the most likely cause and work down: Sensor element drifted. Test before replacing parts.
- 5
Check for recalls and service bulletins
Look up recalls for your exact vehicle with its VIN, and ask a dealer about technical service bulletins (TSBs). Manufacturers sometimes issue software updates or extended warranties for known faults.
- 6
Clear the code and verify the repair
After the repair, clear the code and drive the car under the conditions in the freeze-frame data to confirm it does not return.
P055B repair cost estimate
Estimate, not a quote. Labor times are typical ranges for this code from OBDex, and $125/hr is an assumed rate. Shop rates and labor times vary by vehicle and region. Diagnosis time may be billed separately.
- DIY difficulty
- Easy
- Good DIY job?
- Yes, with a scan tool
Basic hand tools; a common first DIY job.
Parts and systems involved
- Oil pressure sensor B
P055B FAQ
What does P055B mean?
P055B means “Engine Oil Pressure Sensor or Switch B Range or Performance”. Same as P055A with the signal in plausible range yet not matching the engine model.
Is P055B serious? Can I keep driving?
We rate P055B as urgent severity. Not until oil pressure is confirmed. Check the oil level first. If the oil-pressure warning light is on, switch the engine off: running without oil pressure can seize the engine. If the level is fine and the light is off, it may be the sensor, but confirm with a mechanical gauge.
What causes P055B?
The most common causes, from most to least likely: Sensor element drifted. Test before replacing parts, because several causes can set the same code.
How much does it cost to fix P055B?
Typical labor is about $50–$175 at an assumed $125/hour shop rate, plus parts. That is an estimate, not a quote: labor times and rates vary by vehicle and region, and diagnosis may be billed separately.
Can I fix P055B myself?
DIY difficulty is easy. Many owners can handle it with a scan tool, a multimeter and basic hand tools. Always confirm the cause before buying parts.
Will P055B clear itself?
If the fault was intermittent, the warning may go off once the computer stops seeing it, but the code stays in memory. Fix the cause; clearing the code alone doesn’t repair anything.