P094D: Hydraulic Pump Over Temperature
The hydraulic pump reports a over temperature condition. Pump operation is impaired.
What P094D means
P094D is a generic OBD-II powertrain code in the cooling group.
- Check engine light
- Usually on
- Emissions-related
- No
- Limp mode possible
- Yes
- Drive cycle to clear
- Not required
Get it fixed
Post this code once and get quotes from local mechanics. Free to post.
Makes the repair and parts links below specific to your car. Kept in this browser only.
Symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Common causes
- 01Sustained pump loadMost likely
- 02Ambient temperature highPossible
Can I drive with P094D?
No. Stop and let the engine cool.
If the temperature gauge is high or you see steam, pull over and switch off. Driving an overheating engine can warp the head and blow the head gasket.
Why we rate it urgent
- Engine over-temperature can cause head-gasket and engine damage
- Can put the vehicle in limp mode (reduced power)
- Turns on the check engine light
Severity is our rule-based rating from the code’s flags in OBDex and the system it affects, not an inspection of your car. If the check engine light is flashing, or you notice overheating, low oil pressure, or brake or steering problems, stop driving and get help.
How to diagnose P094D
- 1
Confirm the code and save freeze-frame data
Read the codes with an OBD-II scan tool and note every code, not just P094D. Save the freeze-frame data (speed, load, temperature when the fault set) before clearing anything; it tells you when the fault happens.
- 2
Fix other faults first
If other codes are stored, start with power-supply, sensor-circuit and communication codes. They can cause this code as a side effect.
- 3
Check live data
Watch the related sensor and actuator readings in live data (Hydraulic pump, Wiring harness, TCM) and compare them with expected values in the service information for your vehicle.
- 4
Test the likely causes in order
Start with the most likely cause and work down: Sustained pump load; ambient temperature high. Test before replacing parts.
- 5
Check for recalls and service bulletins
Look up recalls for your exact vehicle with its VIN, and ask a dealer about technical service bulletins (TSBs). Manufacturers sometimes issue software updates or extended warranties for known faults.
- 6
Clear the code and verify the repair
After the repair, clear the code and drive the car under the conditions in the freeze-frame data to confirm it does not return.
P094D repair cost estimate
Estimate, not a quote. Labor times are typical ranges for this code from OBDex, and $125/hr is an assumed rate. Shop rates and labor times vary by vehicle and region. Diagnosis time may be billed separately.
- DIY difficulty
- Hard
- Good DIY job?
- Usually a shop job
Involved testing or major parts. Most owners use a shop.
Parts and systems involved
- Hydraulic pump
- Wiring harness
- TCM
P094D FAQ
What does P094D mean?
P094D means “Hydraulic Pump Over Temperature”. The hydraulic pump reports a over temperature condition. Pump operation is impaired.
Is P094D serious? Can I keep driving?
We rate P094D as urgent severity. No. Stop and let the engine cool. If the temperature gauge is high or you see steam, pull over and switch off. Driving an overheating engine can warp the head and blow the head gasket.
What causes P094D?
The most common causes, from most to least likely: Sustained pump load; Ambient temperature high. Test before replacing parts, because several causes can set the same code.
How much does it cost to fix P094D?
Typical labor is about $250–$1,000 at an assumed $125/hour shop rate, plus parts. That is an estimate, not a quote: labor times and rates vary by vehicle and region, and diagnosis may be billed separately.
Can I fix P094D myself?
DIY difficulty is hard. Most owners leave this to a shop because it needs involved testing or specialist tools. Always confirm the cause before buying parts.
Will P094D clear itself?
If the fault was intermittent, the warning may go off once the computer stops seeing it, but the code stays in memory. Fix the cause; clearing the code alone doesn’t repair anything.