P0A93: Inverter A Cooling System Performance
The hybrid control module detects insufficient cooling performance for inverter A, where coolant temperature rise per power dissipation exceeds expected value.
What P0A93 means
P0A93 is a generic OBD-II powertrain code in the hybrid & EV group. In plain English: the signal is within electrical limits but doesn’t make sense compared with other readings, so the part or system isn’t performing as expected.
- Check engine light
- Usually on
- Emissions-related
- No
- Limp mode possible
- Yes
- Drive cycle to clear
- Not required
Get it fixed
Post this code once and get quotes from local mechanics. Free to post.
Makes the repair and parts links below specific to your car. Kept in this browser only.
Common causes
- 01Coolant pump weakMost likely
- 02Low coolant levelPossible
Can I drive with P0A93?
Not recommended beyond getting it to a shop.
This fault can put the engine or transmission in limp mode with reduced power, which can make merging and passing unsafe. Have it diagnosed as soon as possible.
Why we rate it urgent
- Can put the vehicle in limp mode (reduced power)
- Turns on the check engine light
Severity is our rule-based rating from the code’s flags in OBDex and the system it affects, not an inspection of your car. If the check engine light is flashing, or you notice overheating, low oil pressure, or brake or steering problems, stop driving and get help.
How to diagnose P0A93
- 1
Confirm the code and save freeze-frame data
Read the codes with an OBD-II scan tool and note every code, not just P0A93. Save the freeze-frame data (speed, load, temperature when the fault set) before clearing anything; it tells you when the fault happens.
- 2
Check for related codes first
Look for P0C31. Related codes often share a cause; a circuit or sensor code usually needs fixing before a performance code like this one.
- 3
Check live data
Watch the related sensor and actuator readings in live data (Hybrid inverter, Electric coolant pump, Coolant radiator) and compare them with expected values in the service information for your vehicle.
- 4
Test the likely causes in order
Start with the most likely cause and work down: Coolant pump weak; low coolant level. Test before replacing parts.
- 5
Check for recalls and service bulletins
Look up recalls for your exact vehicle with its VIN, and ask a dealer about technical service bulletins (TSBs). Manufacturers sometimes issue software updates or extended warranties for known faults.
- 6
Clear the code and verify the repair
After the repair, clear the code and drive the car under the conditions in the freeze-frame data to confirm it does not return.
P0A93 repair cost estimate
Estimate, not a quote. Labor times are typical ranges for this code from OBDex, and $125/hr is an assumed rate. Shop rates and labor times vary by vehicle and region. Diagnosis time may be billed separately.
- DIY difficulty
- Shop only
- Good DIY job?
- Usually a shop job
Needs dealer-level tools or high-voltage training.
Parts and systems involved
- Hybrid inverter
- Electric coolant pump
- Coolant radiator
P0A93 FAQ
What does P0A93 mean?
P0A93 means “Inverter A Cooling System Performance”. The hybrid control module detects insufficient cooling performance for inverter A, where coolant temperature rise per power dissipation exceeds expected value.
Is P0A93 serious? Can I keep driving?
We rate P0A93 as urgent severity. Not recommended beyond getting it to a shop. This fault can put the engine or transmission in limp mode with reduced power, which can make merging and passing unsafe. Have it diagnosed as soon as possible.
What causes P0A93?
The most common causes, from most to least likely: Coolant pump weak; Low coolant level. Test before replacing parts, because several causes can set the same code.
How much does it cost to fix P0A93?
Typical labor is about $190–$1,000 at an assumed $125/hour shop rate, plus parts. That is an estimate, not a quote: labor times and rates vary by vehicle and region, and diagnosis may be billed separately.
Can I fix P0A93 myself?
DIY difficulty is shop only. Most owners leave this to a shop because it needs involved testing or specialist tools. Always confirm the cause before buying parts.
Will P0A93 clear itself?
If the fault was intermittent, the warning may go off once the computer stops seeing it, but the code stays in memory. Fix the cause; clearing the code alone doesn’t repair anything.