2016 Ford Fusion vehicle speed control problems

“I was driving my car one day and as I was coming down the road the car jerked and picked up speed like on its on and I had to really stop abruptly to stop the car. I thought that was strange, I didn't have any warning lights or any indication that anything was going on I just thought it was weird, then like 2 days later as was driving the car would do this random jerk but again no lights on any indication anything was wrong so I went to work car seemed fine, got on the high way to go pick up my grand kid after work and when I signaled to change lanes attempted to accelerate to pass, the car just hummed and my speed started to diminish and I immediately coasted to nearest exit because I could not accelerate more than 15 mies, I coasted to a strip mall turned the car off waited til I thought the car settled for a moment and attempted to start the car and when I put the car in gear it jerked but as I tried to accelerate it just hummed and no speed overc15 . So I left the car got it towed the next day to another shop because any ford dealerships I called to see if I could tow for diagnostic test said they had extensive waiting period like one had weeks before they…”

“Shift Lever Does Not Select Accurate Gear Due To Worn Bushing (NHTSA 22V-413, OEM 22S43): A degrading bushing attaching the shifter cable to the transmission in certain 2013-2019 Ford vehicles, including the 2016 Fusion, may detach, preventing proper gear selection and potentially causing unexpected movement. Dealers will replace the bushing and add a protective cap.”

“Electric Power Steering Motor Attaching Bolts Corrode (NHTSA 19V-632, OEM 19S26): Corrosion of bolts in the electric power steering system can lead to loss of power steering assist in 2016 Ford Fusion and Lincoln MKZ vehicles in certain states. Dealers will replace bolts and apply a sealant, or install a new steering gear.”

“The contact owns a 2016 Ford Fusion. The contact stated that while driving 65 MPH, the vehicle lost motive power. The contact stated that the vehicle failed to exceed 80 MPH while driving. The vehicle started jerking and failed to exceed 60 MPH. The vehicle jerked and then failed to exceed 40 MPH. After refueling, the vehicle was slow to start. The contact had to pump the accelerator pedal for the vehicle to start. The vehicle was taken to an independent mechanic who retrieved DTC: P02, P0087, P0131, P0302, and P1450. The mechanic informed the contact that the vehicle would not pass State inspection. The local dealer was contacted, who confirmed an unrepaired recall. The vehicle was not diagnosed or repaired. The manufacturer was contacted and opened a case. The failure mileage was unknown.”

“The left rear caliper has been replaced 3 times in the last 6 months and is currently in the shop for a 4th. This locks up for no reason and ruins the brake pad and the rotor and I have now replaced all of that 3 times as well and the brake hose line.”

“This failure narrowly resulted in a serious accident when my vehicle applied the brakes without warning and dropped the speed to below 40 mph on the Highway! I was extremely fortunate not to have been closely followed by a large semi at the time. I researched on my own and found this was a known defect: Ford Recall reference #22S02 (21C24) March 2022. includes vehicles built in Hemosillo plant from Oct 2013 thru 6 April 2015. my fusion was built there on 2 April 2015 but was not included in the March 2022 recall so I was never notified. Apparently this was a known defect and on going problem since Ford issued SSM 50328 to cover various vehicles built from 2013 to 2021 (Includes 2013-2017 Fusion/MKZ). I was able to drive the vehicle safely on back roads to a local Ford dealer where the problem was addressed. I submitted a request for refund to Ford and advise them of this continuing safety issue that should have been addressed with a properly expanded recall. Ford denied my request and tried to avoid the ongoing safety issue claiming it was an "out of warranty" matter.”