2018 Honda CR-V steering problems

“The contact owns a 2018 Honda CR-V. The contact stated that while driving, the steering wheel was sticking in mid turn. A dealer was contacted. The vehicle was taken to an independent mechanic where it was diagnosed and determined that the battery needed to be replaced due to the power steering failure. The vehicle was repaired; however, the battery failure persised. The manufacturer was notified of the failure. The approximate failure mileage was 73,000.”

“At approximately 57,200 miles, the electronic power steering (EPS) rack assembly failed due to internal mechanical binding. When straightening out from turns, the steering wheel sticks in place and requires deliberate manual force to unbind, creating an overcorrection and lane-departure safety hazard. The issue was confirmed by an authorized Honda dealership technician on Repair Order #51151, who verified the internal binding and recommended full replacement of the EPS rack assembly (Part #53620-TLD-A03). No dashboard warning lamps illuminated before or during the failure.”

“My CRV has been having issues with the steering wheel "sticking" and making a clicking noise when turning. I have had it looked at multiple times and Honda dealerships claim they aren't "feeling" or "hearing" what I am. It's concerning when driving at high speeds on the highway with a steering wheel that is sticking during turns.”

“•Symptom Description: While driving straight at highway speeds (typically between 50 and 70 mph), the steering wheel temporarily locks or catches in a central "notch." When making routine micro-corrections to stay centered in the lane, the wheel physically resists. •The "Catch" Release: To overcome this resistance, I must apply deliberate physical force to "break the wheel free." Once it breaks loose, the sudden loss of resistance causes the vehicle to jerk slightly, making it difficult to maintain a smooth, safe line of travel. •Systems Eliminated: This issue persists regardless of whether the Lane Keeping Assist System (LKAS) or Road Departure Mitigation (MDS/RDM) are turned on or off. This is a physical, mechanical resistance in the steering column or gearbox, not an electronic driver-assist intervention. •Diagnostic Note: Because this is a mechanical friction/binding issue within the steering components, it does not trigger a dashboard warning light (MIL) or store an electronic diagnostic trouble code (DTC). A standard computer scan will show no faults. These micro adjustments make it difficult to stay centered in the driving lane, putting myself and others…”

“The contact owns a 2018 Honda CR-V. While the contact's daughter was driving at an undisclosed speed, extra effort was needed to turn the steering wheel while driving the vehicle and the vehicle failed to drive in a straight line. The vehicle was taken to the dealer, who determined that the EPS steering rack needed to be replaced. The failure mileage was approximately 62,000.”

“The Electric Power Steering (EPS) rack failed internally, causing heavy, sticky, and stiff steering accompanied by noise during turns, particularly when making small corrections at freeway speeds. The defect directly put safety at risk by impairing steering control, leading the inspecting authorized Honda dealership technician (Tech #3129) to officially document that the vehicle is "not safe to drive". Both the vehicle and the failing EPS assembly remain unrepaired. The issue was apparent after 4 wheel alignment performed by the dealership on 9/28/2026. ​The steering issue was fully reproduced and confirmed during a test drive and diagnostic procedure by the Honda dealership service department. No dashboard warning lights or error messages appeared prior to or during the failure; the symptoms were entirely physical.”