2019 Hyundai Kona problems

“I have a 2019 Kona that has an issue with excessive oil consumption. I know that Hyundai issued a recall for this problem in 2019 Konas, but they claim my car isn’t included in that recall, and they refuse to help me. It feels like a scam on Hyundai’s part. my plate is: [XXX]”

“Vehicle (2019 Kona) is subject to Recall 203 (piston ring/bore defect). On XXX Puente Hills Hyundai refused the mandatory physcial inspection, instead attempting to charge $1,100 for 'leak repairs.' An independent inspection by Valvoline on XXX confirmed the engine is dry with no leaks, proving the dealer's claim was fraudulent. Following a recent ECU update, the vehicle triggered a P0420 code—a known symptom of the internal engine damage covered by Recall 203. My Hyundai Corporate Case (#XXX) is currently stalled as the dealer refuses to provide technician notes or perform the safety inspection. I am operating an unsafe vehicle with documented internal mechanical failure. Requesting immediate intervention for a physical cylinder inspection. Please refer to the attached document (SUMMARY OF EVENTS) for the full chronology, supporting evidence, and email correspondence related to the dealership's refusal to perform Recall 203. See attached PDF (Evidence_Email_Correspondence) for documentation of the dealership's refusal to provide technician notes and their unprofessional communication regarding this safety recall.”

“My 2019 Hyundai Kona (VIN: [XXX]) experiences violent shaking and complete engine stalling in active traffic when braking, creating an immediate safety hazard on public roads. This directly mirrors the failure mechanics of Safety Recall 203 ([XXX]). Upon inspection, physical evidence of massive silver aluminum metal flakes was discovered clogging the VVT solenoid mesh screens, originating from internal cylinder/piston ring degradation. However, the dealership Universal Hyundai in [XXX] (RO# XXX) issued a fraudulent diagnostic report stating 'no metal found' to evade recall liability. Hyundai Motor America subsequently closed corporate case XXXwithout an internal engine or borescope inspection. I have retrieved the vehicle under financial protest and possess full photographic evidence of the aluminum contamination.”

“My 2019 Hyundai Kona SE (2.0L Nu MPI/Atkinson engine) was previously subject to NHTSA Recall 21V301000 (Hyundai Recall 203) for defective piston oil rings that can chip and cause accelerated oil consumption, engine knocking, and stalling. That recall's remedy was performed under a prior owner in December 2021. In November 2025, a Hyundai dealership installed a Cylinder Noise Diagnostic System (CNDS) software update (Service Campaign 974) specifically meant to detect this defect's vibration signature before it causes engine damage. Approximately 7,000-8,000 miles and about nine months after that software update, the vehicle stalled unexpectedly while being driven on two separate occasions, with no check-engine light or other warning beforehand. A third stall left the vehicle unable to restart. It was towed to a service station, which found no engine oil and no external leak. A Hyundai dealership subsequently diagnosed cracked valves that allowed approximately 5 quarts of oil to burn through the engine, and determined the engine requires complete replacement. This is the same failure mode (oil consumption/engine damage leading to stalling) that the original…”

“Large amounts of oil slipped past the damaged rings into the engine. Oil could not stay no matter how many oil changes and proper maintenance. Hard metal shards got loose into the engine causing the engine to blow. Many codes came up in the diagnoses done by a Hyundai dealership. This has been reported to be a common complaint and problem with this make and model/year of the car. It should not be my responsibility to fix. Its 100% a manufacturer error. Please assist me!”

“On multiple occasions the emergency braking system has engaged while making a lane change because the collision warning system thinks the vehicle is getting to close to the vehicle being passed. When this happens in city traffic, it has resulted in near misses from vehicles behind and in the lane for which a legal lane change is being made to avoid stopping or slowing traffic in the initial lane. The driver should ALWAYS have such control. When this happens and the car is trying to be accelerated or at least maintain the current speed as the lane change is made, the brakes very aggressively counter the driver’s actions. Since this has happened more than a dozen times, including within the first few months of ownership, information in follow-on fields will use approximate most recent occurrence.”