2016 Lexus RX350 problems

“Upon parking after 20-mile drive, severe leak of transmission oil from transmission oil cooler area, no warning messages/lights or fault codes present. No evidence of leak at starting point for drive, was sudden failure internal to transmission cooler with no evidence of impact/vibration damage or corrosion; failure was perhaps at welds of fins to tubing. Leaking oil creates fire and slip hazard, lack of any kind of warning to driver would have allowed continued driving until transmission failed except for luck that this was short trip. Vehicle has never been damaged in a crash, has been carefully inspected and maintained since purchase new. This is not a wear item and should never fail without external damage or corrosion, certainly not at 45,000 miles. Difficult to believe that this anything other than a manufacturing defect on this early production (VIN ending 002034) vehicle. Repaired by Lexus dealer with Lexus covering half of cost as “goodwill” (cost to me at ~$1,050 incl. towing), although dealer attempted to return vehicle without having reinstalled air duct and lower shroud.”

“Loss of power brake assist. The Lexus dealer diagnosed a failed vacuum pump. This is common with the 2016/2017 RX 350's. Lexus has admitted a manufacturing problem with the pumps and has a service bulletin (L-SB-0010-18) and a safety recall on the 2017's (JLD J2D). The recall should be extended to the 2016's. There are tons of people posting on the internet about failed vacuum pumps and resultant safety issues.”

“I am reporting a safety issue with a 2016 Lexus RX350, VIN [XXX], with about 60,000 miles. The vehicle is registered in [XXX] and was being driven to [XXX] when it suddenly overheated on XXX near [XXX]. The warning lights appeared while the vehicle was traveling at highway speed. The driver immediately took the first available exit within about one minute. The failed system appears to be the engine cooling system, specifically the water pump. The vehicle is currently at Kendall Lexus of Eugene and should be available for inspection. This failure created a safety risk because it happened suddenly on a major highway. The driver had to exit quickly and the vehicle became disabled far from home. A sudden coolant-loss or overheating event at highway speed can leave drivers stranded in unsafe locations with very little warning. Kendall Lexus of Eugene inspected the vehicle. Their Service Manager stated in writing that the technician found a leaking water pump, misfires in every cylinder, and a 95% leak in cylinder #6 through the exhaust valves. She stated that the water pump failure caused the vehicle to lose coolant, overheat, and suffer internal engine damage…”

“The contact owns a 2016 Lexus RX 350. While the contact was inside the building where she worked, the hazard lights were flashing unintendedly. When the contact arrived at the residence, the hazard lights were flashing again. The vehicle was not diagnosed or repaired. Additionally, the contact stated that the air bag warning light was illuminated. The contact stated that on a separate occasion, there was an abnormal vibrating sound coming from underneath the brake pedal. No warning lights were illuminated. The manufacturer was not made aware of the failure. The failure mileage was approximately 98,000.”

“*Driver-side entry failure = primary access point compromised * Could trap occupants if internal handle fails or after an accident * Emergency responders rely on driver-side access first * This is not normal wear and tear—it’s a safety-related failure.”

“I am formally submitting a vehicle defect complaint regarding my 2016 Lexus RX 450h, which is experiencing premature and extensive paint degradation, including clear coat peeling, flaking, and fading. This issue is not due to environmental exposure or neglect, but rather a clear indicator of a factory defect related to substandard paint application and adhesion failure. This concern directly aligns with known and previously acknowledged factory paint failures affecting both Lexus and Toyota vehicles. Numerous Customer Support Programs (CSPs) and Technical Service Bulletins (TSBs) have been launched by Toyota Motor Corporation to address: •Faulty clear coat adhesion •Improper surface preparation during manufacturing •Delamination and premature degradation of factory-applied paint, particularly in white pearl and other finishes Despite wide acknowledgment of these issues in prior campaigns (such as CSP ZKC and others involving Lexus RX, ES, and LS models), my vehicle’s VIN was not included—despite exhibiting identical symptoms. Given the extensive documentation of these defects, I am requesting the following: 1.A formal investigation into the paint failure…”