2011 Ford Explorer steering problems

“Estaba estacionado poniendo gas a mi exprorer y cuando la encendí el volante se puso muy duro y me marco el código P07AE-09 y también apareció falla en el sistema de dirección asistida.”

“Car has a history of showing a P07AE-09 code in the power steering control module. When the code logs in the computer the car loses power steering assist while driving causing the steering to be hard to turn. Upon researching the cars recall work we seen that the car had the power steering control module software updated but no steering gear changed. My wife and children ride in this car and I'm afraid that this is going to cause a serious accident.”

“I am reporting a serious safety concern involving my 2011 Ford Explorer, VIN [XXX]. After recently filling the vehicle with fuel, I went to drive it and received a “Power Steering Assist Fault” message on the dashboard. The vehicle then lost power steering assistance, making the steering extremely difficult and requiring significantly more effort to control. The vehicle was inspected by a repair shop, and I was advised that the power steering/steering gear requires replacement at an estimated cost of $2,126.43. Because of the loss of steering assistance, I believe the vehicle is unsafe to drive and presents a serious safety risk, particularly during turns or emergency maneuvers. I understand that Ford previously recalled certain 2011–2013 Ford Explorers under NHTSA Recall 14V-286 (Ford Recall 14S06) for a defect involving the electric power steering gear that could result in loss of power steering assist. The symptoms I am experiencing appear very similar to the defect described in that recall. My vehicle does not appear to be covered by the existing recall based on its VIN. I am requesting that NHTSA review my vehicle and this failure to determine whether it…”

“On Friday 7/24/2026, I was driving and all the sudden my steering went out. Dash flashed No Power Steering Assist / AdvanTrac System Fail. I pulled over immediately to turn around & get home with zero power steering. The amount of strength to steer/control was extreme. To turn was almost impossible. I took my car to Ford AutoNation on Arapahoe in Centennial on 7/27/26, they ran full diagnostics & it came back that the car suffered a hard internal failure (DTC U3000) of the electronic Power Steering Control Module, creating an immediate, dangerous loss of steering assist while driving. This vehicle was subject to Federal Safety Recall 14S06 (NHTSA Campaign 14V286000). According to official Ford OASIS data, Ford attempted to remedy this safety defect in 2014 using a software reflash shortcut (Labor Code 14S06A) rather than replacing the physical defective hardware. I have a text (via their service dept) from the service manager as well stating "it was a reflash" when I asked which labor code was done under the 14S06; "was it the software reflash or the full rack replacement?". I have a formal case with Ford Corporate created 7/31/26, and have that number as well.…”

“The power steering has fully stopped working , the car cannot be steered, this started to happen on the road, I had to steer the entire weight of the car myself, at fast speed it was difficult but not impossible, at slow speed and zero speed or while the vehicle is stationary it was impossible or unmovable to steer. there were no warning lamps about this, the Ford dealer has not detect this in my vehicle's previous recall, further vehicle has two more recalls this year, that have been cited this year by the dealer. this needs to be addressed on their recalls because this can cause a very severe problem on the road”

“The contact owns a 2011 Ford Explorer. The contact stated that while attempting to start the vehicle, the message "Power Steering Assist Fault" was displayed and the vehicle failed to start. The contact stated that the failure reoccurred after starting the vehicle, and the steering wheel locked up. The dealer was contacted, but the vehicle was not diagnosed or repaired. The contact related the failure to NHTSA Campaign Numbers: 14V286000 (Steering) and 14E001000 (Steering); however, the VIN was not included. The manufacturer was not contacted. The failure mileage was approximately 140,000.”