Problems · by component
2012 Hyundai Sonata vehicle speed control problems
84 owner complaints to NHTSA about the 2012 Hyundai Sonata cite vehicle speed control, 5% of all 1,559 complaints for this model year.
Complaints
84
5% of all complaints
Crashes
9
Reported by owners
Fires
0
Reported by owners
Injuries
2
Reported by owners
What owners say about the vehicle speed control
Verbatim from NHTSA complaints, newest first
“The driver side seat belt wont click and stay in almost half the time i drive my car… after reading other complaints its looking like this is a common thing. Within the past year ive noticed lots of times that when im going to lock my car with my fob, it wont lock and its because the passenger side lock button on the inside of door is in a stuck between lock/unlock position… resulting in me having to lean over to manually unlock the door even when I’ve unlocked my car with both the fob and inside button… all the sudden i noticed too that my speed control will not work at all and be completely unresponsive most times. It will RANDOMLY work when i try checking it on highway. ive had SO many issues with my taillights going/burning out constantly and now my headlights have gotten really dim. Im scared to drive at night now. They are much more dimmer than a cars should look like usually. Within the past week i just noticed a random big crack in the dashboard on the passenger side as well… noticed that seems to be a common thing and concern of safety with lots of others who own and drive this same vehicle… my first thought was “what if this crack will effect the…”
“The contact owns a 2012 Hyundai Sonata. The contact stated that while her daughter was driving at undisclosed speeds, the vehicle was jerking abnormally. The passenger's side front tire was extremely hot. The contact stated that the RPM increased to high, and the vehicle lost motive power while driving. The contact stated that while the accelerator pedal was depressed, the vehicle was slow to respond. There was an abnormal electrical burning odor detected. The vehicle was hard to start. The contact stated that the check engine and ABS warning lights were illuminated. On several occasions, the vehicle was taken to the local dealer, who was unable to retrieve any DTC trouble codes. The bearing was fine but was replaced at the owner's request. The mechanic test-drove the vehicle for five hundred miles but was unable to duplicate the failure. The mechanic informed the contact that the ECM was fried. The ECM was replaced, but no update was provided. Additionally, the mechanic informed the contact that the wiring harness had a short circuit and that the wiring harness needed to be replaced. The vehicle was repaired, but the failure persisted. The manufacturer was…”
“The contact owns a 2012 Hyundai Sonata. The contact stated that while driving at 45 MPH, the the passengers side tail light failed. No warning light was illuminated. The vehicle was driven to the independent mechanic where it was diagnosed that the tail light needed to be replaced. The vehicle was repaired however the failure reoccurred and was taken back to the independent mechanic where they stated the harness had melted and advised that he go to the dealer. The vehicle was taken to the dealer where it was confirmed that the passenger's side tail light harness was charred and deformed. The vehicle was repaired but the failure reoccurred. The vehicle was taken back to the dealer for a second time where it was informed that the harness or housing had been scorched and the tail light socket melted. The vehicle was repaired. The contact stated while driving 45 MPH, the accelerator had been depressed but the vehicle was slowing down. The contact managed to drive home safely. The following day the vehicle did not start. The vehicle was towed to the independent mechanic where it was confirmed that the battery failed due to the tail light being illuminated all night.…”
“Daughter was driving her car on interstate, doing 75, in the middle of traffic when the car would jerk and then loose power. The gas petal stopped working and the check engine light would come on. She had to make her way over to the shoulder, without causing an accident. Once car gets shut off and you wait a few minutes, you can start it and drive it home. This has happened about 4 times now. We are lucky that this hasn't caused an accident! This last time (yesterday), the check engine light stayed on and we were able to hook up the dianostic reader and it read the code for the crankshaft positioning sensor A circut. It says online that this is a common problem with that car and is very dangerous. How is this not up for a recall? My daughter is scared to drive her car.”
“When I start the vehicle in the morning I leave the neighborhood going around 15mph and the car loses power. I have to let off the gas completely then reapply but it still continues to studder. I applied the slapstick sift mode and noticed it does this in first and fourth gear. In automatic you can’t see it”
“B pillar separated from the frame during collision causing catastrophic intrusion into the cabin upon impact leading to death of the driver. No other occupants in the vehicle. Multiple investigators noted the B pillar failure upon inspection. Independent, certified crash reconstruction expert also noticed immediately that the B pillar had failed which caused cabin intrusion to an extraordinary degree considering the 2 vehicles involved were going less than 40mph. Vehicle is available for inspection. In addition, edr data reveals that although throttle was engaged, rpm's remained at idle up to the time of impact. Driver pushing on the gas and vehicle not responding.”
Showing 6 of 84 reports. Read every report on NHTSA.gov.
Data from NHTSA Complaints API (owner reports, unverified) · synced Nov 9, 2026NHTSA vehicle page
Complaints are unverified owner reports to NHTSA and are not normalized for sales volume. One complaint can cite several components.