2016 Jeep Wrangler vehicle speed control problems

“Vehicle reflects a code of C2200. It is due to a faulty ABS module that controls the antilock brake system, traction w and cruise control. The remedy is to replace the part (part number 68259556AD). This part has been on national back order for several years now with no anticipated date of release. The manufacturer has Indicated it will not be made. This is a safety item that not only affects the performance of the vehicle but limits it resale value. Numerous vehicles from 2011-2017 models have been affected.”

“The ABS control module has internal problem which shuts down the module. Results of the module shut down includes: -The stability and traction systems are offline. -A failure in the ABS module or hydraulic unit. -Cruise Control inoperable. -The module no longer modulates brake pressure, which can result in brakes locking. Currently, Mopar has stopped production of this item, so there is no method to replace a failed or non-working module with an original part.”

“The ABS module has failed and this is such a widespread issue with Jeep Wranglers that you can't even find a new ABS module part to order. The failure of this part impacts the braking system. Jeep should make a recall and fix this issue.”

“ABS Module has been on backorder since 2021. Cannot get an ETA on part from the dealership. They advised its been on backorder 3 yrs at the time issue was confirmed. 9 months to date on backorder list. No traction control, ABS, cruise control and emergency brake. The vehicle has lost speed making it not maintain a speed on hills, and highway. Vehicle feels unstable.”

“ABS module reported to dealer in February, 2025..They said was safe to drive. Then April 2025 the module went out.-Part has been on backorder since March 2025. It was taken to Key Chrysler Dodge Jeep in Marianna in March 2025. Jeep would not steer properly, the brakes were not normal and all the warning lights on dash were on. I could not drive. .”

“Pulled into parking space. Applied brakes and came to a complete stop. Could hear engine revving up.. Thought ok, that gas pedal seem to be pressed. Look at my foot wasn’t pressing the pedal. Looked at floor mats. It was laying flat on floor, not manipulating the pedal. I thought what’s happening? And lifted foot off brake ever so slightly and car jumped 6 inch high curb and hit the building.. Pretty hard. Caused structural damage to the wall. I went to the hospital, driven by husband. Swelling of my right leg on the shin. Released and told to stay off leg for few days, no fractures.After doing research, It seems other jeep riders have had this experience. I have no idea how fast the jeep was going.”