2015 Ram 1500 power train problems

“The contact owns a 2015 Ram 1500. While driving at an undisclosed speed, the ABS, traction control, and several other unknown warning lights illuminated. On a separate occasion, the transmission failed to shift out of park(P). The contact manually unlocked the automatic gearbox and shifted the transmission into neutral(N) before shifting out of park(P). The vehicle was taken to the dealer and DTC: C2200-49; was retrieved. The dealer determined that the ABS module needed to be replaced. The manufacturer was notified of the failure by phone, and a case was filed. The failure mileage was approximately 163,000.”

“There is a recall for Ram 1500 manufactured between January 2015-September 2015 regarding failed power steering. My truck was manufactured February 2015 and was not on the list of specific Ram 1500s to have this recall done. I was with my kids getting an oil change on the truck. When I was leaving the maintenance bay my power steering suddenly failed and left us stranded to get towed. Chrysler stated that there was certain conditions that led for certain models to have recalls for this part, but not my truck. They could not give me a clear reason why mine was not included on the list.”

“There is a known issue about exhaust manifolds for my year model truck. A ram technician said in 2019 mopar created a new exhaust manifold for my truck that would be less likely to create soot buildup and warping in the exhaust manifold. In 2021 my EGR was replaced because of a recall but now my exhaust manifold has failed and needs to be replaced out of pocket even though it’s been a known issue and there was a remedy already made to alleviate the issue. Now because of soot buildup my throttle is limited until I have it fixed. But driving to a dealership is too far to be diagnosed as there has been cases of fires occurring when this issue occurs.”

“Stellantis has a recall for Loss of Crankshaft Position, Reference: 66A / NHTSA 23V-411. They did not include my truck in the recall but I have the exact same problem as verified by the dealer. The Recall Center will not answer the phone and reports errors when I call. The warranty center will not deal with this as it's a recall issue. The cost to repair all the parts is $8,745.75 without any coverage or recall support. The recall remedy was to flash the computer which would be a minimal cost but the dealer cannot do this unless my vehicle is added to the recall. The vehicle is in "limp mode" and is not safe for use while this issue persists. The problem became evident while starting the vehicle in the driveway.”

“While driving at approximately 50 mph, my truck suddenly shut off without warning. I lost engine power, power brakes, and power steering. I was only able to stop safely because I happened to be traveling uphill. This created a serious safety hazard. The failure was caused by the crankshaft tone ring issue addressed in the existing recall. The tone ring has already been replaced, but the recall requires a dealer-performed ECM software update to complete the repair and ensure the vehicle is safe to operate. The dealership is refusing to perform the recall software update because my truck has an aftermarket exhaust and a modified EGR valve. These modifications are unrelated to the recall. The recall only involves an ECM software update, and my ECM is completely stock. Because of this refusal, I cannot safely drive my truck. I am concerned that the engine may shut off again at higher speeds, creating a severe risk of an accident. I am requesting assistance to ensure the recall is completed so the vehicle can be operated safely.”

“In writing complaint against FCA for not fairness for some VINs with Ecodiesel doesn’t include W68. Following with recall W58 vs W68, my VIN was picked for W58, but never pick for W68 because my VIN is not included. Just complete service for crankshaft throttle failure and spent $2000 for this. I am very disappointed that crankshaft failure recalled do not cover because W68 was not included. I think those W58 for computer update failed to prevent break down due to loose magnetic issue. My VIN is suppose to add recall for W68 because FCA missed this. W58 failed to cover the damages with crankshaft which is mean computer doesn’t solve the problem.”