Service brakes
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2019 Camry vehicles. The vane cap inside the vacuum pump may break, causing the pump to fail, which could result in a sudden loss of braking assist.
38 owner complaints to NHTSA about the 2018 Toyota Camry cite service brakes, hydraulic, 5% of all 754 complaints for this model year. NHTSA also lists 2 recalls on this component.
“The contact owns a 2018 Toyota Camry. The contact stated while drivng at an undisclosed speed, the brake pedal was depressed, however the vehicle failed to stop as intended. The vehicle was towed to the dealer ted after several attempts, the vehicle eventually started. The contact stated while driving at an undisclosed speed, the accelerator pedal was depressed, howver the vehicle failed to accelerate as intended. The RPM's increased. In addition, the contact stated that the failure occurred while traveling over 800 miles away from home. The vehicle was driven to the contact's cousins's residence. The contact's husband inspected the vehicle, and noticed metal shavings on the dip stick. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was ade aware of the failure and a case was filed. where it was diagnosed with a failed brake vacuum pump assembly. The vehicle was repaired. The contact received a recall notification, NHTSA Campaign Number: 21V890000 (Service Brakes, Hydraulic). The contact stated when retrieving the vehicle from the dealer, the contact noticed an unusal sound. The vehicle was taken back to the…”
“The contact owns a 2018 Toyota Camry. The contact stated that while parking on two occasions, a "brake pressure low, stop at a safe place" message appeared and an unknown warning light. The vehicle was taken to an independent mechanic where she was informed that there was an unknown recall associated with the failure and it was diagnosed that the brake pump and booster needed to be replaced. The vehicle was not repaired. The vehicle was then taken to a dealer where the failure was not able to be replicated. The vehicle was then was taken to the same independent mechanic where it was diagnosed that the brake pump and booster needed to be replaced. The vehicle was repaired. The manufacturer was notified of the failure. The failure mileage was 60,184.”
“The contact owns a 2018 Toyota Camry. The contact stated while driving approximately 40 MPH, the brake pedal was depressed to slow for a traffic signal and the brake pedal was firm. The message "Low Braking Power" was displayed. The contact was able to stop the vehicle. The contact had the vehicle towed to an independent mechanic who diagnosed the vehicle and determined that the brake vacuum pump assist had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was not informed of the failure. The contact was informed that there was an open recall on the VIN; NHTSA Campaign Number: 21V890000 (Service Brakes, Hydraulic). The failure mileage was approximately 105,000.”
“The contact owns a 2018 Toyota Camry. While the contact's wife was driving approximately 5 MPH, the brake pedal was depressed; however, the pedal failed to respond. The contact's wife was able to stop the vehicle. The contact’s wife was not aware of any warning lights being illuminated. The contact had taken the vehicle to a dealer and was provided the cost for a diagnostic test. The contact informed the dealer that the VIN was included in NHTSA Campaign Number: 21V890000 (Service Brakes, Hydraulic); however, the dealer refused to repair the vehicle. The manufacturer was informed of the failure. The failure mileage was approximately 72,000.”
“The contact owns a 2018 Toyota Camry. The contact that while driving 60 MPH and attempting to complete a turn, upon depressing the brake pedal, the contact became aware that the brake pedal was stiff and had seized in the depressed position. As a result, the contact briefly lost control of the vehicle, coming to a complete stop in a field after leaving the roadway and engaging the parking brake. The service brake warning light was illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 21V890000 (Service Brakes, Hydraulic). The VIN was included, and the remedy was available. The manufacturer was notified of the failure, and a case was opened. The failure mileage was 101,000.”
“The contact owns a 2018 Toyota Camry. The contact stated while driving approximately 30 MPH and attempting to stop the vehicle, the brakes failed to respond as intended. The brake fluid low message was displayed. The contact was able to safely pull the vehicle to the side of the road and inspect the brake fluid; however, no failure was found. The vehicle was not diagnosed or repaired by an independent mechanic or local dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 108,580.”
Showing 6 of 38 reports. Read every report on NHTSA.gov.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2019 Camry vehicles. The vane cap inside the vacuum pump may break, causing the pump to fail, which could result in a sudden loss of braking assist.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018 Toyota Camry and Highlander vehicles, 2017 Toyota Sienna and Tacoma vehicles and 2017 Lexus RX350 vehicles. During the manufacturing process, the oil galley in the rotor for the brake booster vacuum pump assembly may have been improperly machined possibly resulting in a sudden loss of brake assist.
Complaints are unverified owner reports to NHTSA and are not normalized for sales volume. One complaint can cite several components.