2010 Subaru Outback problems

“It is a known issue with subarus of this year that the engine will stall at random intervals when stopping, weather at a stop sign or stop light, warm or cold, fast stops or regular stopping. There is no consistency to it, completely random. There are no warning lights that appear, I have not taken this car to the dealer because after purchasing it I cannot afford to take it to the dealer. I purchased this car used for my elderly parents and this is a disturbing problem that could get them hurt or killed. Why has this KNOWN issue not been recalled? there are multiple service bulletins reported to NHTSA addressing this issue but no recall?”

“This car is a very well-maintained, low-use vehicle with regular oil changes and routine maintenance performed on schedule. Early in this drive, I noticed an unusual hissing sound as I approached a stop. When I tried to brake, I realized my brakes didn't seem to be responding. I pressed the brake pedal harder and realized that with 50-100 pounds of pressure (guess), I could slow the car down. As I came to a stop, the engine died. I restarted the car, and it died again immediately. After the following restart, I realized I could manually keep the RPM up in neutral while at stops, and press with significant force to get the car to stop. Had I not been comfortable two foot driving or understood the issue, this surely would have resulted in a crash of some sort. The car indicated a check engine light, loss of traction control, a flashing BRAKE light, and a flashing cruise control light. I took the car immediately to a local shop where they identified the problem as a vacuum leak at the brake booster. The plastic piece that the hose clamps onto had cracked off, leading to this problem. This make and model does not seem to have a check valve downstream of this component.”

“The contact's father owned a 2010 Subaru Outback. The contact's father received recall notifications of NHTSA Campaign Number: 20V001000 (Air Bags) and would like to be removed from the recall distribution list because he no longer owns the vehicle, and the vehicle was exported to Canada. The dealer and the manufacturer were not contacted.”

“We experienced a steering failure which could have led to a very serious accident. Returning on a freeway after purchasing groceries we heard a kind of rattle rhat seemed to come from behind the hub of the steering wheel. We made it home but as we pulled into our driveway the steering failed completely. The steering wheel spun around like a pinwheel, no resistance whatsoever and absolutely no effect on the car’s steering. If this had happened on the freeway I hate to think what might have happened. The car had to be towed to the local Subaru dealer where it took 17 days to repair the vehicle. We were lucky. It could well have been a disaster.”

“On Saturday, August 9, 2025, my brakes failed at highway speed. My vehicle's stopping distance was severely increased, forcing me to perform an emergency swerve into the leftmost lane to avoid rear-ending a truck. The maneuver was extremely hazardous, as it occurred in a construction zone with concrete barriers and no shoulder, leaving no safe escape path and endangering myself and others. I confirmed the cause was a catastrophic failure of the four-way brake line union block due to severe corrosion. There were no warning lamps or symptoms prior to the incident; the failure was sudden and total. I found that this defect is difficult to spot during inspections because the part is hidden by a plastic panel. The failed union block and corroded lines were removed and are available for inspection upon request. My research shows this is a widespread issue and the exact failure mode covered by Subaru Recall WQK-47R for 2005-2009 models. This known safety defect persists in the 2010-2014 generation, which is not covered by the recall. Prohibitive dealer repair costs are forcing unsafe workarounds. This defect presents an unreasonable risk to public safety, and I urge…”

“This is not about my car, but instead many different cars. When a cars lights are set to it's parking lights or running lights position, often located on the turn signal stalk, at night it appears to the driver that their headlights are on, when in fact only the "parking lights are on in front. This is a problem, but not what I'm reporting. When in the parking light position (at night), it appears the headlights are on because there's some light out front AND the instrument cluster is lit up as well. Here's the defect in design, the brake lights are NOT on, completely dark at the rear of the vehicle, so drivers are driving on the highway thinking their headlights and brakes lights are on, when they're not. When the parking light position is active, it should include the brake lights. Can't imagine how many rear-enders are because of this design flaw. *The rotating light switch on turn signal stalks often get unknowingly rotated out of Auto or the headlight position when the turn signal is repeatedly used.”