2018 Lincoln MKZRecalls, problems, MPG & safety

“Around end of May or beginning of June 2026 a check engine light came on in our 2018 MKZ. The code showed cylinder 3 misfire. We called our local Ford dealership for diagnosis. We almost didn't get there as it started to overheat on the way. Once at Ford they diagnosed it with coolant intrusion in cylinder 3. They said this was a known issue and needed a new block. $11,500 for replacement. They said driving it could cause catastrophic problems to the vehicle and possibly the passengers in it. The vehicle had 65,873 miles on it at time and once home it has stayed in the garage since. They said warranty was over and to call Lincoln for assistance programs as it was a known safety defect. I did call and Lincoln denied any help with repairs.”

“Scanned codes P0741, P1450, P1744, & P2196. Check the transmission fluid level and condition. No fluid drained from hole, added a little fluid, and retrieved a sample of the fluid. The fluid is very dark. Identifix states, if the fluid smells or has the appearance of being black due to internal clutch slippage, the transmission should be replaced or overhauled. If the transmission fluid is in good condition and found to be at the proper level, monitor the Torque Converter Clutch actual slip (TC_SLIPACT) and TCC desired slip (TC_SLIPDSD) PIDs through the scan tool as the vehicle is driven noting these reading should stay relatively closed together expecting the reading to show to be within 10 RPM of each other. Seeing the values spread apart supports the setting of the P0741 and P1744 codes. Note that excessive TCC slip can be caused by multiple internal factors including mechanical failure of the TCC solenoid, an issue of a valve body component that does not hydraulically react to the activation of the solenoid, a leaking valve body gasket, a leaking input shaft seal, or failure of the torque converter seal. There are no external testing measures that can be…”

“The contact owns a 2018 Lincoln MKZ. The contact stated that while driving approximately 30-35 MPH, the engine overheated. The contact pulled over and became aware that the coolant reservoir was empty. The contact added coolant to the coolant reservoir. The vehicle was taken to an independent mechanic, where it was determined that there was coolant leaking into the cylinder, which caused engine failure. The vehicle was taken to the local dealer, where it was diagnosed, and the engine was replaced. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 80,000.”